Zebra Technologies P110I user manual Industry Canada Notice

Page 5

Foreword

Declarations of Conformity

EUROPE: Norway Only: This product is also designed for IT power system with phase to phase voltage 230V. Earth grounding is via the polarized, 3-wire power cord.

FI: “Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan”

SE: “Apparaten skall anslutas till jordat uttag”

NO: “Apparatet må tilkoples jordet stikkontakt”

Model P110i conforms to the following specification: FCC Part 15, Subpart A, Section 15.107(a) and Section 15.109(a) Class B digital device.

Industry Canada Notice

This device complies with Industry Canada ICES-003 class B requirements.

Supplemental Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference’s by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful:

How to identify and resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4. Use of a shielded cable is required to comply within Class B limits of Part 15 of FCC Rules. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by Zebra may cause, harmful interference and void the FCC authorization to operate this equipment.

980515-001 Rev. A

P110i User’s Manual

v

Image 5
Contents User’s Manual Page Trademarks ForewordCopyright Notice Declarations of Conformity Product Disposal Return Materials AuthorizationIndustry Canada Notice Icons Part Number Description P110i Printer ModelViii P110i User’s Manual Table of Contents P110i Printer Operation Unpacking Your Card Printer Getting StartedControls and Indicators USB Port Power SwitchPower Socket LCD Panel can display the following messages Multi-Function LCD PanelFeed Long Cleaning Card in Exit Getting Started Connecting the P110i Printer Printer InstallationInstalling the P110i Printer Printer Installation 115 VAC 230 VAC Installing the Printer Driver Print Driver Installation Printer Installation Change Printer Driver Options Printer Installation Printer Installation Printer Installation Printer Features P110i Printer SetupLoading Ribbon Cartridge Card Feeder Loading CardsCard Feeder Cover Stack Card Output Hopper Printing a Test CardP110i Printer Setup Creating a Sample Card P110i Printer OperationPrinting Printing a Sample Card P110i Printer Operation P110i Printer Operation Cleaning System CleaningWhen to Clean How to CleanCleaning Cleaning the Print Head Cleaning Print Quality Issues TroubleshootingTroubleshooting Procedures Possible Cause Example Printing shows blurry printed image Troubleshooting Technical Specifications USB 1.1 cable included ISO standard dimensions for magnetic stripe card Card DimensionsISO standard dimensions for plain card Technical Specifications Introduction Magnetic Card EncoderMagnetic Card Stripe Encoder Media Loading Orientation Magnetic Encoder CleaningISO Standard Encoding Magnetic Card Encoder Install Card SenseTM Single Card Feed Kit Card SenseTM Single Card Feed ModePrinting a Single Card Without Using the Feeder Open the lid of the card cleaning cartridge Install Card Cleaning CartridgeRibbon Cartridge Printing a Single Card Setting Up the Printer DriverSales and Support Locations Worldwide Sales & SupportAmericas EuropeAsia Pacific WebsiteLatin America Sales Office