EM 220
Caution
1.Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight. Doing so can cause battery overheating and/or combustion. In addition, battery performance and product life may be reduced.
2.The battery contains a safety mechanism to prevent danger. Do not use the battery in a location that is prone to static electricity (above the amount covered by the manufacturer’s product warranty). Static electricity may damage the safety mechanism resulting in overheating, combustion and/or explosion.
3.The temperature ranges for battery usage are as follows. Any usage outside of these ranges can result in battery overheating and/or damage. In addition, battery performance and product life may be reduced.
-Charging: 0 ~ 40℃
-Product Usage:
-Storage:
-
4.Please review the exclusive charger manual carefully for charging instructions.
5.If upon first use following purchase, a strange odor, overheating, and/or anything deemed out of the ordinary is detected, discontinue use and contact an authorized Zebra Technologies service provider.
6.Store the battery in a location that is out of the reach of small children. During usage, make sure to place the charger and/or product out of the reach of small children.
7.If the battery is leaking electrolytic solution, and the solution comes into contact with the skin or clothing, immediately rinse the affected area with clean water. Contact with skin can result in skin disorders.
8.Make sure to review the user manual and precautions carefully prior to use.
9.Improper exchange of the battery can pose risk of explosion. When replacing the
battery, use a battery equivalent to the battery originally installed in the printer by the manufacturer. Dispose of used batteries per the instructions provided by the manufacturer.
10. If using preprinted receipt paper, please consult Technical Support.
Rev. 1.00 | - 12 - | Mobile Printer User’s Manual |