3. Installation & Usage
3-1 Battery Installation
3-2 Battery Charging
3-2-1 Battery Charging Usage
③
①
②
3-2-2 Battery Holder (Optional) Usage
④
③
①
②
Rev. 1.00
EM 220
1)Insert the battery on the rear side of the printer, aligning the battery hook properly.
2)Push the battery into the slot until a snapping sound is heard.
NOTE
As the battery is not charged at the time of purchase, charge the battery prior to product use. (Use the battery charger and/or the optional battery holder.)
1)Turn off the printer power.
2)Connect the power cord② to the battery
charger ①.
3)Open the Interface Cap ③.
4)Connect the battery charger ① to the power connector of the printer.
5)Plug the power cord ② into an electrical outlet.
CAUTION
The printer may incur serious damage if the battery charger provided by Zebra is not used. Zebra is not legally liable for any such damages. (The voltage and electrical current specifications of the printer and battery charger must match.)
1)Connect the power cord② to the battery charger ①.
2)Connect the battery charger ① to the power connector of the battery holder ③.
3)Plug the power cord ② into an electrical outlet.
4)Insert the battery ④ into the battery holder ③ until a snapping sound is heard.
- 16 - | Mobile Printer User’s Manual |