EM 220
6. Peripherals Connection
This product can communicate with other devices via Bluetooth communication and cable.
6-1 Bluetooth Connection
1) The printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.).
2) Use the Bluetooth connection function supported by the device to connect to the printer.
NOTE
Refer to the Bluetooth Manual for more details on connection.
You can check authentication, Encryption mode as well as connection mode of the Bluetooth from self test page.
CAUTION
The Bluetooth connector located on the right side of the printer is for program downloading only. This connector is for service providers only.
6-2 Interface Cable Connection
①
1)Open the Interface Cap ①.
2)Connect the interface cable (optional) ② to the cable connector of the printer.
NOTE
Use only cables (optional) provided by Zebra (USB, Serial).
3) Connect the interface cable to the USB port of the device (PDAs, PCs, etc.).
②
NOTE
The interface cable that can be connected with the printer is available in both USB and Serial type.
Refer to the service manual for detailed interface cable specifications.
Rev. 1.00 | - 26 - | Mobile Printer User’s Manual |