Zebra Technologies EM 220 user manual MSR Usage, Self-Test Instructions

EM 220

3-7 MSR Usage

1) Press the MSR cover to open.

2) Insert the card as shown in the image and swipe in the direction of the arrow. (can be done in both directions)

3) When finished using, press the MSR cover to close it.

NOTE

If the card does not register, first check to see if it is properly aligned. When swiping the card, the recommended swiping speed is 100 ~ 1500 mm/sec.

4. Self-Test

Run the self-test when first setting the printer or when encountering a problem, and check the following:

- Control Circuit, Mechanisms, Print Quality, ROM Version, and Memory Switch Settings

If no issue is found with the printer after running the self-test, examine the other devices or peripherals and software. This function is independent of such other devices and software.

•Self-Test Instructions

1)Turn the printer power off and close the printer paper cover.

2)Pressing the paper feed button and power button simultaneously turns the printer on.

3)The printout is produced after releasing the two buttons.

4)To add a printout of the ASCII pattern, press the paper feed button once more.

5)After the ASCII pattern is printed out, the self-test is automatically terminated.

Rev. 1.00 - 23 - Mobile Printer User’s Manual