EM 220
3-2-3-2 Battery Charging
1) Fasten batteries via the battery hooks into the Quad Charger as shown above.
2) Push the battery in until a snapping sound is emitted.
3) Charging begins as soon as the battery is completely inserted.
Batteries are charged to 8.4VDC, 0.8A.
4) Push the hook and pull up to extract the battery.
NOTE
Battery charging status descriptions are as follows.
LED | Charge Status | |
Red LED On | Charging | |
Green LED On | Charging Complete | |
Red Lamp Blinking | Problem with Battery and/or | |
Placement | ||
|
CAUTION
If the red LED is blinking, try extracting the battery and reinserting. If the red LED continues to blink, please consult the reseller.
Charge Time
2 hours
Rev. 1.00 | - 18 - | Mobile Printer User’s Manual |