Nortel Networks Instant Internet 400 Unit manual LEDs during operation

Chapter 5 LEDs: support and diagnostic functions 49

LEDs during operation

After the power-up sequence is complete, the LEDs indicate status and activity during operation as shown in Table 18.

Table 18 LED status and appearance during operation

LED #	Color	Appearance	Meaning
Power	Green	Solid	Unit has electrical power and is turned on.
Power	Green and	Solid Green and	Unit is updating flash ROM. DO NOT TURN
	Amber	Flashing Amber	OFF until light returns to green.
1	Green	Blinking	Unit is operating normally.
2	Green	Solid	Unit is ready to service clients.
2	Green and	Solid Green and	Unit is communicating with clients.
	Amber	Flashing Amber
2	Amber	Solid	Unit is ready to run setup but cannot service
			clients (normally occurs before unit has been
			configured).
3-8	Green	Solid	Indicated interface (see Note below) is online.
3-8	Green	Flashing	Indicated interface (see Note below) is dialing or
			attempting connection.
3-8	Green and	Solid Green and	Traffic is on the indicated interface.
	Amber	Flashing Amber
3-8	Red	Solid	Indicated interface (see Note below) has failed.

Note: The “indicated interface” is the interface associated with the LED’s number. This information is available in the main dialog box of the iiSetup program. For more information, refer to Using the BayStack Instant Internet Management Software Version 7.11.

Setting Up the BayStack Instant Internet 400 Unit