Nortel Networks Instant Internet 400 Unit manual

Chapter 4 DIP switch settings 45

Table 13 shows the switch settings to disable the switch settings for resetting the password and user-defined configurations.

Table 13 Switch settings to disable switch settings for resetting the password and user-defined configurations

	1	2	3	4	5	6	7	8
ON	•	•		•	•	•	•
OFF			•					•

Table 14 shows the switch settings for restoring your unit to factory default conditions.

Table 14 Switch settings for restoring factory default conditions

	1	2	3	4	5	6	7	8
ON	•	•	•		•	•	•
OFF				•				•

Caution: If you use these switch settings to restore your unit to factory default conditions, the following user-defined settings are removed or reset: password, hosts, port mappings, unit configuration, access restrictions, unit registration, and encryption authorization.

If you purchased and installed the 3DES Encryption Module (part number CQ1010005), you need to reinstall it.

If you used the switch settings in Table 13 to disable the reset password and configuration switch settings, these settings are re-enabled.

Setting Up the BayStack Instant Internet 400 Unit