Nortel Networks Instant Internet 400 Unit manual Chapter Introduction, Instant Internet package

21

Chapter 1

Introduction

This chapter introduces your Instant Internet 400 unit and describes package contents, available options for your Instant Internet unit, and any requirements and compatibility issues.

Instant Internet package

The Instant Internet package contains:

•Instant Internet 400 unit

•Depending on the type of connection you ordered, your Instant Internet package contains one or more of the following connector cables:

—RJ-11 cable (phone cord) for a dial-up connection

—ISDN cable for an ISDN connection

—RJ-45 cable for a 10BASE-T or 100BASE-T Ethernet connection

—RJ-48 cable for a T1 or DDS connection

Note: If you ordered your Instant Internet unit for use on a token ring network or with a V.35 or X.21 modem, you must provide the connection cable. For pinout diagrams for V.35 and X.21 adapter cables, refer to Appendix B, “Adapter cable pinout diagrams,” on page 53.

•Important Notice for the BayStack Instant Internet Version 7.11 (Part number 307603-E)

•Installing the BayStack Instant Internet Management Software Version 7.11 (Part number 209226-B)

Setting Up the BayStack Instant Internet 400 Unit