Nortel Networks 5530 5520-24T-PWRconfig#default qos agent queue-set, Egress Queue Recommendations

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide	v2.0	NN48500-559

The qos queue-set-assignment queue-set <1-8> 1p <0-7> queue <1-8> command gives the user the ability to specify the queue to associate an 802.1p priority. This command is in the CLI priv-exec mode.

•5520-24T-PWR(config)#default qos agent queue-set

The default qos agent queue-set command will default the egress CoS and QoS queue set. The default CoS/QoS queue mode is 8. This command is in the CLI priv-exec mode.

•5520-24T-PWR(config)#show qos agent

The show qos agent command displays the current attributes for egress CoS and QoS queue mode, resource sharing mode and QoS NVRAM commit delay. This command is in the CLI priv-exec mode.

•5520-24T-PWR(config)#qos agent nvram delay

The qos agent nvram delay command will modify the maximum time in seconds to write config data to non-volatile storage. This command is in the CLI priv-exec mode.

•5520-24T-PWR(config)#qos agent reset-default

The qos agent reset-default command resets QoS to its configuration default. This command is in the CLI priv-exec mode.

Egress Queue Recommendations

If you are running all untagged traffic and do not change default port priority settings, use setting 1 CoS.

___________________________________________________________________________________________________________________________

Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution	18