Interconnects and Speaker Cables

We have a general recommendation about interconnects, which is that they should cost less than the amplifier. We have tried a lot of products and most of them work well, but as a practical matter we cannot make blanket recommendations.

The amplifier is not sensitive to source interconnects. It is also not sensitive to radio frequency pickup, which allows some flexibility in choosing source interconnects without shields.

We prefer speaker cables that are thick and short. Silver and copper are the preferred metals. If you find any cable made of gold, please send me a couple hundred feet.

Fortunately the amplifier is not sensitive to the capacitive/inductive character of some of the specialty speaker cables, so feel free to experiment.

We have found that about 90 per cent of bad sounding cables are really bad connections, and we recommend that special attention be paid to cleanliness of contact surfaces and tight fit.

Speaker cables should be firmly tightened down at the speaker output terminals, but do not use a wrench. They will not withstand 100 foot-lbs of torque. Hand tightening without excessive force is plenty.

Fun Hardware Facts

The X250 has a power transformer rated at 1200 watts, continuous duty. Under actual conditions in the amplifier, it will do about 1800 watts for short duration.

The X250 has 20 computer grade capacitors at 10,000 uF and 50 volts each. These are used to create the unregulated output stage rails at plus and minus 47 volts at 20 amps.

All the power transistors in the product are power Mosfets, actually Hexfets from International Rectifier and Harris. These are hyper-matched parts, with gate voltages matched to 0.5% and all devices taken from the same lot codes (made on the same wafer). The speed and noise critical gain devices in the front end, (that is to say the actual balanced pair of transistors) are ultra low noise and distortion matched JFETs having a low (.02 S) transconductance figure. The JFETs are made on the same substrate for prefect matching.

The X250 has 32 output Mosfet power transistors in TO-3 metal packages. The output stages can sustain transients of about 6,000 watts, but are not allowed to dissipate more than 1000 watts for any instant, even into a dead short.

So how long will this hardware last? It is my experience that, barring abuse or the odd failure of a component, the first things to go will be the power supply capacitors, and from experience, they will last 15 to 20 years. Fortunately they die gracefully and are easily replaced. After that, the longevity will depend on the number of operating thermal cycles, but I can say that I have had amplifiers operating in the field in excess of 20 years with no particular mortality except capacitors. The answer is, I don’t have good information beyond that. More to the point, I would suggest that you not worry about it. This is a conservatively built industrial design, not a tweaky tube circuit run on the brink. If it breaks, we will simply get it fixed, so sleep well.

Page 5

X250 specifications

The Pass Labs X250 is a distinguished power amplifier that showcases the brand's commitment to delivering high-quality audio performance, blending robust engineering with innovative technology. Known for its exceptional build quality and sonic capabilities, the X250 is designed for audiophiles and music enthusiasts who demand the best from their audio equipment.

At its core, the X250 is a Class A/B amplifier, which means it combines the efficiency of Class B with the superior sound quality of Class A. This hybrid design allows the amplifier to deliver high power output while maintaining low distortion levels, resulting in a clean, dynamic sound that captures the essence of the original recording. The amplifier delivers 250 watts into 8 ohms and 500 watts into 4 ohms, making it suitable for driving a wide range of loudspeakers with ease.

One of the standout features of the X250 is its use of Pass Labs' proprietary “Bias Current” technology. This innovative system optimizes performance by ensuring that the output devices operate in their most linear region, reducing crossover distortion and enhancing the amplifier's overall sound quality. This results in a more accurate and natural reproduction of audio, appealing to listeners who seek fidelity above all else.

Another notable characteristic of the X250 is its impressive dynamic range. The amplifier is designed to handle transient peaks with confidence, preserving the impact and nuance of musical passages, whether it's the delicate pluck of a guitar string or the thunderous notes of a full orchestra. The low noise floor further enhances the listening experience, allowing even the quietest details to be heard clearly.

The build quality of the X250 is equally impressive, featuring a rugged chassis and high-grade components that ensure durability and reliability. With its elegant appearance, the amplifier is not only a functional piece of equipment but also an attractive addition to any audio setup. The attention to detail in the design is evident, with a focus on minimizing vibrational interference and maintaining signal integrity.

In conclusion, the Pass Labs X250 is a remarkable power amplifier that combines advanced technology with exceptional sound quality. Its Class A/B design, Bias Current technology, and high power output make it a versatile choice for a wide range of audio applications. For those who value both performance and aesthetics, the Pass Labs X250 stands out as a superb option in the realm of high-fidelity audio amplification.