Nortel Networks NN44470-100 manual Video codec configuration

- 53 -

Nortel MAS Console

Field	Description
Supported Audio Codecs	The following audio codecs are supported: G.711-
	ULAW, G.711-ALAW, EVRC-0, and G.729A. To
	enable an audio codec, from the Available list,
	select an audio codec, and then click the right
	arrow. Use the left arrow to remove an audio
	codec.
Add	Click Add to enable an audio codec. From the
	Available list, select an audio codec, and then click
	Add.
Add All	Click Add to enable all audio codecs. From the
	Available list, select an audio codec, and then click
	Add All.
Remove	Click Remove to disable an audio codec. From the
	Enable list, select an audio codec, and then click
	Remove.
ptimes	Select the packet times (ptimes) to enable for each
	enabled audio codec.
Default	Select the default packet time for each enabled
	audio codec.
Restart Required	This is a read-only field. It indicates whether a
	restart of the server is required if you modify the
	trusted node host name or IP address. Values are
	Yes and No. Yes indicates a platform restart is
	required for the configuration change to take effect.
OK	Click OK to close the dialog box.
Cancel	Click Cancel to close the dialog box without saving
	changes.

Video codec configuration

The following figure shows an example of a Video Codec Configuration dialog box.

Nortel Media Application Server 6.0 for AS 5300

Fundamentals

NN44470-100 01.01 Standard

Release 6.0 03 June 2008

Copyright © 2008, Nortel Networks