Manuals / EverFocus / TV and Video / DVR

EverFocus ECOR264-8F1, ECOR264-8D1, ECOR264-4D1, ECOR264-4F1 Misc, Firmware, Configurations

Models: ECOR264-4D1 ECOR264-8D1

1 128

Download 128 pages 15.06 Kb

Page 88

4.9.5 Misc.

4.9.5 Misc.

Figure 4-36 System Menu – Firmware & Misc.

Firmware

Current Firmware Version: Displays the current version.

Firmware Upgrade: Press “Upgrade” to upgrade the firmware.

NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with the latest version of the firmware. Do not disconnect the USB device or turn off the power to the unit during the upgrade; this can cause the system to fail to recover, requiring factory service to repair.

Configurations

Load Factory Default: Click “Load” to restore all menu settings to the default values. User Account, Network Setting, and Time are not affected.

Load From USB: Click “Load” to upload saved DVR configuration settings from a USB flash device.

Save To USB: Click “’Save” to save the current DVR configuration settings to a USB flash device.

Language: Choose which language the DVR uses. The available languages may vary based on region.

80

Image 88

EverFocus ECOR264-8F1, ECOR264-8D1, ECOR264-4D1, ECOR264-4F1 user manual Misc, Firmware, Configurations

Contents

ECOR264-4F1/ECOR264-4D1 ECOR264-8F1/ECOR264-8D1 User ManualECOR264-4F1/ ECOR264-4D1 ECOR264-8F1/ ECOR264-8D1 Instruction Manual Release Date NovSafety Precautions CleaningRead Instructions Retain InstructionsPower Cord Protection AttachmentsWater and Moisture ServicingWEEE 2 MOUSE AND FRONT PANEL OPERATION TABLE OF CONTENTSGENERAL DVR OPERATIONS General PTZ control if PTZ cameras are installed DVR CONFIGURATION6 REMOTE OPERATION FROM BROWSER 1 PRODUCT OVERVIEW 1.1 FEATURESChapter Digital Video Recorder User Manual x AC Adapter and Power Cord 1.2 PACKAGE CONTENTSMouse x 1.3 SPECIFICATIONS Note1 PIP display is not available in playback mode 1.4 FRONT PANELNote2 9-screen display available in 8 Channel model only 11 POWER LED This LED ON indicates Power on 12 ALARM LED This LED ON indicates Alarm active19 MENUPress this key to enter/exit MAIN SETUP MENU 7 / I IReverse playback or pause 8 / I IForward playback or pause1.5 REAR PANEL 1.8 ALARM CONTACTS INSTALLATION 1.6 VIDEO INPUTS/OUTPUTS INSTALLATION1.7 AUDIO INSTALLATION 1.9 RS-485 keyboard / PTZ Installation 1.8.1 Alarm Input Contacts1.8.2 Alarm Output Relay 1.9.1 General RS-485 bus installationImproper RS-485 bus star wiring RS-485 bus serial wiring with connector boxes and connection cableStar wiring with RS-485 signal distributor 1.9.5 Speed Dome Installation 1.9.2 RS-485 socket pin assignment1.9.3 EKB-500 connection with network patch cable 1.9.4 EKB-500 connection to several DVRs1.11NETWORK CONNECTION 1.10USB-Mouse installation1.11.1 Direct PC Connection through Crossover Network Cable 1.12FINAL INSTALL PROCESS 1.11.2 Network Connection through Patch Cable2.1.1 How to select a channel / Enable audio 2.1.3 Operation in the Configuration Menus2 MOUSE AND FRONT PANEL OPERATION 2.1 GENERAL USB MOUSE OPERATION2.1.4 Field Input Options Bar Click and hold on the bar to adjust the set point Left or Right 2.2.1 How to select a channel / Enable audio 2.2.4 Operation in Configuration Menu2.2 General Front Panel Operation 2.2.2 OSD Root Menu2.2.5 Field Input Options The buttons on the right and bottom have the following functions 3.2 LOGIN 3. GENERAL DVR OPERATIONS3.1 RECORD Chapter3.3 SELECT CAMERA OPERATION 3.4 CHANGE AUDIO OUTPUT OPERATION3.5 PLAYBACK Figure 3-2 On-screen Keyboard2009/05/25 090940PM 2009/05/25 090930PM2009/05/25 091030PM 3.6 PTZ 3.6.1 General PTZ control if PTZ cameras are installed3.6.2 Express Control of PTZ Figure 3-3 Express Control PTZ∙ 14, 15 PTZ tilt down ∙ 16 PTZ pan/tilt right and down REMEMBER∙ 6 Focus closer ∙ 10 Focus further ∙ 7 Zoom in ∙ 11 Zoom out 3.7 LAYOUT 3.8 CHANNEL SWITCHING3.7.1 Bring to full screen mode 3.9 DISPLAY 3.10 SEQUENCE3.11 ZOOM HD temp. too high3.12 SEARCH Figure 3-4 Zoom Express Control3.12.1 Time Search Figure 3-5 Search Menu - Time SearchFrom Select starting date and time To Select ending date and time 3.12.2 Event SearchCamera Select which cameras to search for 3.13 COPY 3.14 LOGOUT 4 DVR CONFIGURATION 4.1 CONFIGURATION MENU4.2 EXPRESS ChapterRecord Mode Record Withcorrectly if you plan to use the DDNS feature see Section Network Type4.3 CAMERA SETTING 4.3.1 Basic SettingPage 4.3.2 Video Adjust 4.3.3 Motion Output Type Output action when motion is triggered Timeout Alarm output lasts for the set time durationTimeout Duration Time duration selectable from 1 to 150 seconds How to select motion grid by mouse 1. Select lower-right gridFigure 4-5 Camera Menu - Motion Grid Setting 4.3.4 Video Loss Figure 4-6 Camera Menu - Video Loss4.4 RECORD & PLAY SETTING 4.4.1 Record4.4.2 Built-in Calculator xx days of data can be stored based on current setting 4.4.3 Play4.5 ALARM & EVENT SETTING 4.5.1 AlarmOutput Type Output action when alarm is triggered Timeout Alarm output lasts for the set time durationTransparent Alarm output remains as long as the alarm input is active Timeout Duration Time duration selectable from 1 to 150 seconds4.5.2 Event HD Temperature HD Failure Figure 4-13 Alarm & Event Menu - Event - HD FailureHD Full Figure 4-14 Alarm & Event Menu - Event - HD FullHD Off Figure 4-15 Alarm & Event Menu - Event - HD OffPower Loss Figure 4-16 Alarm & Event Menu - Event - Power LossNetwork Loss Figure 4-17 Alarm & Event Menu - Event - Network Loss4.5.3 Schedule Setting 4.5.4 Express Setup4.5.5 Holidays To Set Schedule using Mouse 4.5.6 ScheduleSchedule Setting from front panel Page Editing Timezone NTSC 720x480 720x240 PAL 720x576 / 720x288 4.5.7 Alarm Action To Set Schedule using MouseAlarm Action Setting from front panel Page Page 4.6.1 LAN 4.6 NETWORK SETTINGNetwork Type HTTP Port Port number for HTTP/WEB communication The default port for the ECOR264-4/ECOR264-8 isAdditional information NOTE For more reliable email service, use the server’s IP address 4.6.2 EMAIL4.6.3 DDNS EverfocusDDNSPassword Password of the dyndns account Confirm Re-enter password Example http//hostname.everfocusddns.comHost name Host name created through the dyndns account User name User name of the dyndns account4.6.4 Alarm Server 4.7 Disk Information 4.7.1 Disk4.8.1 Monitor OSD 4.8 DISPLAY SETTINGMain Monitor Step Sequence order. For reference 4.8.2 Main M/T SEQCamera Select which camera appears in the current step 4.9 SYSTEM SETTING 4.9.1 Date/Time4.9.2 Daylight Saving 4.9.3 User Edit Figure 4-34 System Menu - User - EditConfiguration Menu at the DVR Main Menu at the DVRUser Level and Right User Level and Right4.9.4 I/O Control RS485Everfocus, or Samsung. NOTE all cameras must use the same protocol Control4.9.5 Misc ConfigurationsFirmware 4.10 INFORMATION 4.10.1 SystemSystem NetworkFrom 4.10.2 LogLog Type Next Page Go to the next page of log Close Close the window Prev Page Go to the previous page of logFigure 4-39 Log List 5 Networking Overview 5.1 Introduction to TCP/IP5.2 Subnet Masks 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page Click on the option that says “Use the following IP address” Restart both the computer and the DVRStraight Through Ethernet Cable Pin outs 5.8 Direct High Speed Modem ConnectionConnection Procedure Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Connection Procedure 5.9 Router or LAN ConnectionStraight Through Ethernet Cable Pin outs Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an addresso If using Windows Vista, choose Search instead Type “command” and click on OKTo set DVR for Internet Connection through router 6 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO ECOR264-4/ECOR264-8Chapter 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsInstall the ePlusDVR.cab file when prompted to do so Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do soNow, you will able to see the remote live page 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Close the window so you are back at the login screen Install the ePlusDVR.cab file when prompted to do soDefault password Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW 6.4 REMOTE PLAYBACK 7 EVERFOCUS DDNS SETUP ChapterDDNS name until you get “Success” 8.2 TYPICAL LINKSYS PORT FORWARDING 8 LINKSYS & D-LINK PORT FORWARDINGChapter Here is an example for how the port information might look 8.3 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule 9 TROUBLESHOOTING The DVR will not go into record modeThe DVR displays nothing on the main monitor There is no display coming from one of the channels on the DVRAPPENDIX A TIMING OF ALARM MODES Appendixt Event Alarm Reset Input Event Alarm Durationt Duration = t Reaction Timeout Mode Retrigger of Alarms Case Record Mode Normal + EventRecord With Recording days APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESCase Record Mode Normal + Event or Event Only Record With Preset SettingPreset Setting Option APPENDIX C REMOTE CONTROL AppendixHeadquarter Office Beijing officeEuropean Office Japan Office