EverFocus ECOR264-8D1, ECOR264-8F1, ECOR264-4D1, ECOR264-4F1 user manual Alarm & Event Setting

4.5 ALARM & EVENT SETTING

Figure 4-10 is a screen shot of the ALARM & EVENT SETTING MENU. This menu will walk you through alarm and event setup.

Figure 4-10 Alarm & Event Menu - Alarm

4.5.1 Alarm

Alarm: Select the alarm input trigger connection number from 1 to 4/8.

Enable: Check box to enable response to that alarm trigger.

Log: Check box to record these alarm events in the log.

Pre-alarm Record: Check box to start copying recorded video to the hard disk from several moments before the alarm event. (Pre-alarm recording rate will follow “Normal” frame rate setting)

Buzzer: Check this box to enable the buzzer when an alarm occurs.

Main Monitor: Monitor display options when a motion occurs.

No change: No change on the main monitor display.

Full screen: A full screen of the active camera will display on main monitor.

Record: Select which camera(s) will start recording in response to this alarm event.

Email Notify: Check box to enable email notification when an alarm occurs. Email operation requires that valid email settings have been entered in the Network Setting/Email setup screen.

Input Type: This field is to change the type of alarm trigger.

45