EverFocus ECOR264-4D1, ECOR264-8F1, ECOR264-8D1, ECOR264-4F1 user manual Rear Panel

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel.

○ ○		○	○	○	○	○
3	5	7	8	9	10	11

○1○2 ○4 ○6

Figure 1-2 Rear Panel

○1 POWER: Plug the DC 12V power source provided into the power socket.

○2 Alarm In: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts or can accept TTL/CMOS signal polarity.

○3 Alarm Out: N.C or N.O type alarm out (form “C”).

○4 RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices

○5 Audio In: Connect a line level audio mixer output/source to the audio input connection.

○6 Audio Out: Connect the input of a line level audio amplifier to the audio output connection.

○7 Video In: Connect camera’s video output or other composite video source to the video input connection.

○8 Video Out: Main monitor - connect a CCTV monitor to the video output connection.

○9 VGA:Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is 1024x768.

○10 USB 1.0: USB port recommended for connecting the USB mouse.

6