Manuals / EverFocus / TV and Video / DVR

EverFocus ECOR264-8D1, ECOR264-8F1, ECOR264-4D1, ECOR264-4F1 Information, System, Network, Status

Models: ECOR264-4D1 ECOR264-8D1

1 128

Download 128 pages 15.06 Kb

Page 89

4.10INFORMATION

4.10INFORMATION

4.37is a screen shot of the INFORMATION MENU. This menu displays important system information.

Figure 4-37 Information Menu – System

4.10.1 System

System

Version: Displays firmware version number.

Model: Displays DVR model number.

NTSC/PAL: Displays current video format.

Network

IP: Displays the DVR’s current IP Address.

MAC: Unique address of the DVR’s internal network card. This option cannot be changed.

DVR Name: Displays DVR DDNS name

Network ID: The ID number for the PowerCon alarm network.

Status

Disk: Displays disk status; normal disk operation is indicated by “OK”.

81

Image 89

EverFocus ECOR264-8D1, ECOR264-8F1, ECOR264-4D1, ECOR264-4F1 user manual Information, System, Network, Status

Contents

User Manual ECOR264-4F1/ECOR264-4D1 ECOR264-8F1/ECOR264-8D1Release Date Nov ECOR264-4F1/ ECOR264-4D1 ECOR264-8F1/ ECOR264-8D1 Instruction ManualCleaning Safety PrecautionsRead Instructions Retain InstructionsAttachments Power Cord ProtectionWater and Moisture ServicingWEEE GENERAL DVR OPERATIONS TABLE OF CONTENTS2 MOUSE AND FRONT PANEL OPERATION DVR CONFIGURATION General PTZ control if PTZ cameras are installed6 REMOTE OPERATION FROM BROWSER Chapter 1.1 FEATURES1 PRODUCT OVERVIEW Mouse x 1.2 PACKAGE CONTENTSDigital Video Recorder User Manual x AC Adapter and Power Cord 1.3 SPECIFICATIONS Note2 9-screen display available in 8 Channel model only 1.4 FRONT PANELNote1 PIP display is not available in playback mode 12 ALARM LED This LED ON indicates Alarm active 11 POWER LED This LED ON indicates Power on19 MENUPress this key to enter/exit MAIN SETUP MENU 7 / I IReverse playback or pause 8 / I IForward playback or pause1.5 REAR PANEL 1.7 AUDIO INSTALLATION 1.6 VIDEO INPUTS/OUTPUTS INSTALLATION1.8 ALARM CONTACTS INSTALLATION 1.8.1 Alarm Input Contacts 1.9 RS-485 keyboard / PTZ Installation1.8.2 Alarm Output Relay 1.9.1 General RS-485 bus installationStar wiring with RS-485 signal distributor RS-485 bus serial wiring with connector boxes and connection cableImproper RS-485 bus star wiring 1.9.2 RS-485 socket pin assignment 1.9.5 Speed Dome Installation1.9.3 EKB-500 connection with network patch cable 1.9.4 EKB-500 connection to several DVRs1.11.1 Direct PC Connection through Crossover Network Cable 1.10USB-Mouse installation1.11NETWORK CONNECTION 1.11.2 Network Connection through Patch Cable 1.12FINAL INSTALL PROCESS2.1.3 Operation in the Configuration Menus 2.1.1 How to select a channel / Enable audio2 MOUSE AND FRONT PANEL OPERATION 2.1 GENERAL USB MOUSE OPERATION2.1.4 Field Input Options Bar Click and hold on the bar to adjust the set point Left or Right 2.2.4 Operation in Configuration Menu 2.2.1 How to select a channel / Enable audio2.2 General Front Panel Operation 2.2.2 OSD Root Menu2.2.5 Field Input Options The buttons on the right and bottom have the following functions 3. GENERAL DVR OPERATIONS 3.2 LOGIN3.1 RECORD Chapter3.4 CHANGE AUDIO OUTPUT OPERATION 3.3 SELECT CAMERA OPERATION3.5 PLAYBACK Figure 3-2 On-screen Keyboard2009/05/25 091030PM 2009/05/25 090930PM2009/05/25 090940PM 3.6.1 General PTZ control if PTZ cameras are installed 3.6 PTZFigure 3-3 Express Control PTZ 3.6.2 Express Control of PTZ∙ 6 Focus closer ∙ 10 Focus further ∙ 7 Zoom in ∙ 11 Zoom out REMEMBER∙ 14, 15 PTZ tilt down ∙ 16 PTZ pan/tilt right and down 3.7.1 Bring to full screen mode 3.8 CHANNEL SWITCHING3.7 LAYOUT 3.10 SEQUENCE 3.9 DISPLAY3.11 ZOOM HD temp. too highFigure 3-4 Zoom Express Control 3.12 SEARCHFigure 3-5 Search Menu - Time Search 3.12.1 Time SearchCamera Select which cameras to search for 3.12.2 Event SearchFrom Select starting date and time To Select ending date and time 3.13 COPY 3.14 LOGOUT 4.1 CONFIGURATION MENU 4 DVR CONFIGURATION4.2 EXPRESS ChapterRecord With Record ModeNetwork Type correctly if you plan to use the DDNS feature see Section4.3.1 Basic Setting 4.3 CAMERA SETTINGPage 4.3.2 Video Adjust 4.3.3 Motion Timeout Alarm output lasts for the set time duration Output Type Output action when motion is triggeredTimeout Duration Time duration selectable from 1 to 150 seconds How to select motion grid by mouse 1. Select lower-right gridFigure 4-5 Camera Menu - Motion Grid Setting Figure 4-6 Camera Menu - Video Loss 4.3.4 Video Loss4.4.1 Record 4.4 RECORD & PLAY SETTING4.4.2 Built-in Calculator 4.4.3 Play xx days of data can be stored based on current setting4.5.1 Alarm 4.5 ALARM & EVENT SETTINGTimeout Alarm output lasts for the set time duration Output Type Output action when alarm is triggeredTransparent Alarm output remains as long as the alarm input is active Timeout Duration Time duration selectable from 1 to 150 seconds4.5.2 Event HD Temperature Figure 4-13 Alarm & Event Menu - Event - HD Failure HD FailureFigure 4-14 Alarm & Event Menu - Event - HD Full HD FullFigure 4-15 Alarm & Event Menu - Event - HD Off HD OffFigure 4-16 Alarm & Event Menu - Event - Power Loss Power LossFigure 4-17 Alarm & Event Menu - Event - Network Loss Network Loss4.5.4 Express Setup 4.5.3 Schedule Setting4.5.5 Holidays 4.5.6 Schedule To Set Schedule using MouseSchedule Setting from front panel Page Editing Timezone NTSC 720x480 720x240 PAL 720x576 / 720x288 To Set Schedule using Mouse 4.5.7 Alarm ActionAlarm Action Setting from front panel Page Page Network Type 4.6 NETWORK SETTING4.6.1 LAN Additional information The default port for the ECOR264-4/ECOR264-8 isHTTP Port Port number for HTTP/WEB communication 4.6.2 EMAIL NOTE For more reliable email service, use the server’s IP addressEverfocusDDNS 4.6.3 DDNSExample http//hostname.everfocusddns.com Password Password of the dyndns account Confirm Re-enter passwordHost name Host name created through the dyndns account User name User name of the dyndns account4.6.4 Alarm Server 4.7.1 Disk 4.7 Disk InformationMain Monitor 4.8 DISPLAY SETTING4.8.1 Monitor OSD Camera Select which camera appears in the current step 4.8.2 Main M/T SEQStep Sequence order. For reference 4.9.1 Date/Time 4.9 SYSTEM SETTING4.9.2 Daylight Saving 4.9.3 User Figure 4-34 System Menu - User - Edit EditMain Menu at the DVR Configuration Menu at the DVRUser Level and Right User Level and RightRS485 4.9.4 I/O ControlEverfocus, or Samsung. NOTE all cameras must use the same protocol ControlFirmware Configurations4.9.5 Misc 4.10.1 System 4.10 INFORMATIONSystem NetworkLog Type 4.10.2 LogFrom Figure 4-39 Log List Prev Page Go to the previous page of logNext Page Go to the next page of log Close Close the window 5.1 Introduction to TCP/IP 5 Networking Overview5.2 Subnet Masks 5.3 Gateway Address5.4 Virtual Ports 5.5 Pre-Installation5.6 What is your Network Setup? Crossover Ethernet Cable Pin outs 5.7 Simple One to One ConnectionConnection Procedure Page Page Restart both the computer and the DVR Click on the option that says “Use the following IP address”Connection Procedure 5.8 Direct High Speed Modem ConnectionStraight Through Ethernet Cable Pin outs Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Straight Through Ethernet Cable Pin outs 5.9 Router or LAN ConnectionConnection Procedure Exit from the Menu to save settings To manually assign an address Log into the EverFocus DVR menu and go to the Network Setting Menuo If using Windows Vista, choose Search instead Type “command” and click on OKTo set DVR for Internet Connection through router Chapter 6.1 CONNECTING TO ECOR264-4/ECOR264-86 REMOTE OPERATION FROM BROWSER 6.2.1 Installing ActiveX controls 6.2 BROWSER SECURITY SETTINGInstall the ePlusDVR.cab file when prompted to do so Now, you will able to see the remote live page Install the MSXML file when prompted to do soRight click on the yellow bar and select “Run Add-on…” 6.2.2 Enabling ActiveX Controls “Prompt” “Enable”Install the ePlusDVR.cab file when prompted to do so Close the window so you are back at the login screenDefault password Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW 6.4 REMOTE PLAYBACK Chapter 7 EVERFOCUS DDNS SETUPDDNS name until you get “Success” Chapter 8 LINKSYS & D-LINK PORT FORWARDING8.2 TYPICAL LINKSYS PORT FORWARDING Here is an example for how the port information might look 8.3 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule The DVR will not go into record mode 9 TROUBLESHOOTINGThe DVR displays nothing on the main monitor There is no display coming from one of the channels on the DVRAppendix APPENDIX A TIMING OF ALARM MODESt Duration = t Reaction Alarm Reset Input Event Alarm Durationt Event Timeout Mode Retrigger of Alarms Record Mode Normal + Event CaseRecord With Recording days APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESPreset Setting Option Record With Preset SettingCase Record Mode Normal + Event or Event Only Appendix APPENDIX C REMOTE CONTROLBeijing office Headquarter OfficeEuropean Office Japan Office