Manuals / EverFocus / TV and Video / DVR

EverFocus ECOR264-4D1 user manual The buttons on the right and bottom have the following functions

Models: ECOR264-4D1 ECOR264-8D1

1 128

Download 128 pages 15.06 Kb

Page 26

Manual background

Bar: Press “Enter” key to activate the slider, then use arrow keys to adjust the setting. Press “Enter” again to finalize the changes.

*Note about on-screen keyboard: Click on a button to input that character.

The buttons on the right and bottom have the following functions:

Delete	Delete the letter
Done	Confirm the selection
All Caps	Switch to capital letters
Space	Enter a space
←	Move to left
→	Move to right
Cancel	Cancel and exit from the keyboard

18

Image 26

EverFocus ECOR264-4D1, ECOR264-8F1, ECOR264-8D1 user manual The buttons on the right and bottom have the following functions

Contents

ECOR264-4F1/ECOR264-4D1 ECOR264-8F1/ECOR264-8D1 User ManualECOR264-4F1/ ECOR264-4D1 ECOR264-8F1/ ECOR264-8D1 Instruction Manual Release Date NovRead Instructions Safety PrecautionsCleaning Retain InstructionsWater and Moisture Power Cord ProtectionAttachments ServicingWEEE GENERAL DVR OPERATIONS TABLE OF CONTENTS2 MOUSE AND FRONT PANEL OPERATION General PTZ control if PTZ cameras are installed DVR CONFIGURATION6 REMOTE OPERATION FROM BROWSER Chapter 1.1 FEATURES1 PRODUCT OVERVIEW Mouse x 1.2 PACKAGE CONTENTSDigital Video Recorder User Manual x AC Adapter and Power Cord 1.3 SPECIFICATIONS Note2 9-screen display available in 8 Channel model only 1.4 FRONT PANELNote1 PIP display is not available in playback mode 19 MENUPress this key to enter/exit MAIN SETUP MENU 11 POWER LED This LED ON indicates Power on12 ALARM LED This LED ON indicates Alarm active 7 / I IReverse playback or pause 8 / I IForward playback or pause1.5 REAR PANEL 1.7 AUDIO INSTALLATION 1.6 VIDEO INPUTS/OUTPUTS INSTALLATION1.8 ALARM CONTACTS INSTALLATION 1.8.2 Alarm Output Relay 1.9 RS-485 keyboard / PTZ Installation1.8.1 Alarm Input Contacts 1.9.1 General RS-485 bus installationStar wiring with RS-485 signal distributor RS-485 bus serial wiring with connector boxes and connection cableImproper RS-485 bus star wiring 1.9.3 EKB-500 connection with network patch cable 1.9.5 Speed Dome Installation1.9.2 RS-485 socket pin assignment 1.9.4 EKB-500 connection to several DVRs1.11.1 Direct PC Connection through Crossover Network Cable 1.10USB-Mouse installation1.11NETWORK CONNECTION 1.12FINAL INSTALL PROCESS 1.11.2 Network Connection through Patch Cable2 MOUSE AND FRONT PANEL OPERATION 2.1.1 How to select a channel / Enable audio2.1.3 Operation in the Configuration Menus 2.1 GENERAL USB MOUSE OPERATION2.1.4 Field Input Options Bar Click and hold on the bar to adjust the set point Left or Right 2.2 General Front Panel Operation 2.2.1 How to select a channel / Enable audio2.2.4 Operation in Configuration Menu 2.2.2 OSD Root Menu2.2.5 Field Input Options The buttons on the right and bottom have the following functions 3.1 RECORD 3.2 LOGIN3. GENERAL DVR OPERATIONS Chapter3.5 PLAYBACK 3.3 SELECT CAMERA OPERATION3.4 CHANGE AUDIO OUTPUT OPERATION Figure 3-2 On-screen Keyboard2009/05/25 091030PM 2009/05/25 090930PM2009/05/25 090940PM 3.6 PTZ 3.6.1 General PTZ control if PTZ cameras are installed3.6.2 Express Control of PTZ Figure 3-3 Express Control PTZ∙ 6 Focus closer ∙ 10 Focus further ∙ 7 Zoom in ∙ 11 Zoom out REMEMBER∙ 14, 15 PTZ tilt down ∙ 16 PTZ pan/tilt right and down 3.7.1 Bring to full screen mode 3.8 CHANNEL SWITCHING3.7 LAYOUT 3.11 ZOOM 3.9 DISPLAY3.10 SEQUENCE HD temp. too high3.12 SEARCH Figure 3-4 Zoom Express Control3.12.1 Time Search Figure 3-5 Search Menu - Time SearchCamera Select which cameras to search for 3.12.2 Event SearchFrom Select starting date and time To Select ending date and time 3.13 COPY 3.14 LOGOUT 4.2 EXPRESS 4 DVR CONFIGURATION4.1 CONFIGURATION MENU ChapterRecord Mode Record Withcorrectly if you plan to use the DDNS feature see Section Network Type4.3 CAMERA SETTING 4.3.1 Basic SettingPage 4.3.2 Video Adjust 4.3.3 Motion Timeout Duration Time duration selectable from 1 to 150 seconds Output Type Output action when motion is triggeredTimeout Alarm output lasts for the set time duration How to select motion grid by mouse 1. Select lower-right gridFigure 4-5 Camera Menu - Motion Grid Setting 4.3.4 Video Loss Figure 4-6 Camera Menu - Video Loss4.4 RECORD & PLAY SETTING 4.4.1 Record4.4.2 Built-in Calculator xx days of data can be stored based on current setting 4.4.3 Play4.5 ALARM & EVENT SETTING 4.5.1 AlarmTransparent Alarm output remains as long as the alarm input is active Output Type Output action when alarm is triggeredTimeout Alarm output lasts for the set time duration Timeout Duration Time duration selectable from 1 to 150 seconds4.5.2 Event HD Temperature HD Failure Figure 4-13 Alarm & Event Menu - Event - HD FailureHD Full Figure 4-14 Alarm & Event Menu - Event - HD FullHD Off Figure 4-15 Alarm & Event Menu - Event - HD OffPower Loss Figure 4-16 Alarm & Event Menu - Event - Power LossNetwork Loss Figure 4-17 Alarm & Event Menu - Event - Network Loss4.5.3 Schedule Setting 4.5.4 Express Setup4.5.5 Holidays To Set Schedule using Mouse 4.5.6 ScheduleSchedule Setting from front panel Page Editing Timezone NTSC 720x480 720x240 PAL 720x576 / 720x288 4.5.7 Alarm Action To Set Schedule using MouseAlarm Action Setting from front panel Page Page Network Type 4.6 NETWORK SETTING4.6.1 LAN Additional information The default port for the ECOR264-4/ECOR264-8 isHTTP Port Port number for HTTP/WEB communication NOTE For more reliable email service, use the server’s IP address 4.6.2 EMAIL4.6.3 DDNS EverfocusDDNSHost name Host name created through the dyndns account Password Password of the dyndns account Confirm Re-enter passwordExample http//hostname.everfocusddns.com User name User name of the dyndns account4.6.4 Alarm Server 4.7 Disk Information 4.7.1 DiskMain Monitor 4.8 DISPLAY SETTING4.8.1 Monitor OSD Camera Select which camera appears in the current step 4.8.2 Main M/T SEQStep Sequence order. For reference 4.9 SYSTEM SETTING 4.9.1 Date/Time4.9.2 Daylight Saving 4.9.3 User Edit Figure 4-34 System Menu - User - EditUser Level and Right Configuration Menu at the DVRMain Menu at the DVR User Level and RightEverfocus, or Samsung. NOTE all cameras must use the same protocol 4.9.4 I/O ControlRS485 ControlFirmware Configurations4.9.5 Misc System 4.10 INFORMATION4.10.1 System NetworkLog Type 4.10.2 LogFrom Figure 4-39 Log List Prev Page Go to the previous page of logNext Page Go to the next page of log Close Close the window 5.2 Subnet Masks 5 Networking Overview5.1 Introduction to TCP/IP 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page Click on the option that says “Use the following IP address” Restart both the computer and the DVRConnection Procedure 5.8 Direct High Speed Modem ConnectionStraight Through Ethernet Cable Pin outs Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Straight Through Ethernet Cable Pin outs 5.9 Router or LAN ConnectionConnection Procedure o If using Windows Vista, choose Search instead Log into the EverFocus DVR menu and go to the Network Setting MenuExit from the Menu to save settings To manually assign an address Type “command” and click on OKTo set DVR for Internet Connection through router Chapter 6.1 CONNECTING TO ECOR264-4/ECOR264-86 REMOTE OPERATION FROM BROWSER 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsInstall the ePlusDVR.cab file when prompted to do so Now, you will able to see the remote live page Install the MSXML file when prompted to do soRight click on the yellow bar and select “Run Add-on…” 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Default password Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW 6.4 REMOTE PLAYBACK 7 EVERFOCUS DDNS SETUP ChapterDDNS name until you get “Success” Chapter 8 LINKSYS & D-LINK PORT FORWARDING8.2 TYPICAL LINKSYS PORT FORWARDING Here is an example for how the port information might look 8.3 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule The DVR displays nothing on the main monitor 9 TROUBLESHOOTINGThe DVR will not go into record mode There is no display coming from one of the channels on the DVRAPPENDIX A TIMING OF ALARM MODES Appendixt Duration = t Reaction Alarm Reset Input Event Alarm Durationt Event Timeout Mode Retrigger of Alarms Record With Recording days CaseRecord Mode Normal + Event APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESPreset Setting Option Record With Preset SettingCase Record Mode Normal + Event or Event Only APPENDIX C REMOTE CONTROL AppendixEuropean Office Headquarter OfficeBeijing office Japan Office