Manuals / EverFocus / TV and Video / DVR

EverFocus ECOR264-8D1, ECOR264-8F1, ECOR264-4D1 user manual Network Setting, 4.6.1 LAN, Network Type

Models: ECOR264-4D1 ECOR264-8D1

1 128

Download 128 pages 15.06 Kb

Page 73

4.6 NETWORK SETTING

4.6 NETWORK SETTING

Figure 4-22 is a screen shot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a network connection.

NOTE: Since every Network Configuration is different, please check with your Network Administrator or ISP to see if your DVR requires specific IP addresses and/or port numbers.

Figure 4-22 Network Menu – LAN

4.6.1LAN

Network Type:

Static IP: User can set a fixed IP for network connection.

DHCP: DHCP server in LAN will automatically assign IP for network connection

PPPoE: For direct connection to DSL ONLY. Verify with your ISP if they use PPPoE.

IP: This field shows the DVR’s current IP Address. A static IP address must be set manually. If DHCP or PPPoE is selected, this value will be assigned automatically.

Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the network. If DHCP or PPPoE is selected, this value will be assigned automatically.

Gateway: This field shows the gateway for your network so the DVR will be recognized within the network. If DHCP or PPPoE is selected, this value will be assigned automatically.

DNS Server 1: This field shows the primary DNS server for your network. If DHCP is selected and an internet connection is available, this value will be assigned automatically. This field must have a valid DNS address in order to use the DDNS feature (see Sections 4.6.3 and 7 DDNS for more detail).

65

Image 73

EverFocus ECOR264-8D1, ECOR264-8F1, ECOR264-4D1, ECOR264-4F1 user manual Network Setting, 4.6.1 LAN, Network Type

Contents

User Manual ECOR264-4F1/ECOR264-4D1 ECOR264-8F1/ECOR264-8D1Release Date Nov ECOR264-4F1/ ECOR264-4D1 ECOR264-8F1/ ECOR264-8D1 Instruction ManualCleaning Safety PrecautionsRead Instructions Retain InstructionsAttachments Power Cord ProtectionWater and Moisture ServicingWEEE 2 MOUSE AND FRONT PANEL OPERATION TABLE OF CONTENTSGENERAL DVR OPERATIONS DVR CONFIGURATION General PTZ control if PTZ cameras are installed6 REMOTE OPERATION FROM BROWSER 1 PRODUCT OVERVIEW 1.1 FEATURESChapter Digital Video Recorder User Manual x AC Adapter and Power Cord 1.2 PACKAGE CONTENTSMouse x 1.3 SPECIFICATIONS Note1 PIP display is not available in playback mode 1.4 FRONT PANELNote2 9-screen display available in 8 Channel model only 12 ALARM LED This LED ON indicates Alarm active 11 POWER LED This LED ON indicates Power on19 MENUPress this key to enter/exit MAIN SETUP MENU 7 / I IReverse playback or pause 8 / I IForward playback or pause1.5 REAR PANEL 1.8 ALARM CONTACTS INSTALLATION 1.6 VIDEO INPUTS/OUTPUTS INSTALLATION1.7 AUDIO INSTALLATION 1.8.1 Alarm Input Contacts 1.9 RS-485 keyboard / PTZ Installation1.8.2 Alarm Output Relay 1.9.1 General RS-485 bus installationImproper RS-485 bus star wiring RS-485 bus serial wiring with connector boxes and connection cableStar wiring with RS-485 signal distributor 1.9.2 RS-485 socket pin assignment 1.9.5 Speed Dome Installation1.9.3 EKB-500 connection with network patch cable 1.9.4 EKB-500 connection to several DVRs1.11NETWORK CONNECTION 1.10USB-Mouse installation1.11.1 Direct PC Connection through Crossover Network Cable 1.11.2 Network Connection through Patch Cable 1.12FINAL INSTALL PROCESS2.1.3 Operation in the Configuration Menus 2.1.1 How to select a channel / Enable audio2 MOUSE AND FRONT PANEL OPERATION 2.1 GENERAL USB MOUSE OPERATION2.1.4 Field Input Options Bar Click and hold on the bar to adjust the set point Left or Right 2.2.4 Operation in Configuration Menu 2.2.1 How to select a channel / Enable audio2.2 General Front Panel Operation 2.2.2 OSD Root Menu2.2.5 Field Input Options The buttons on the right and bottom have the following functions 3. GENERAL DVR OPERATIONS 3.2 LOGIN3.1 RECORD Chapter3.4 CHANGE AUDIO OUTPUT OPERATION 3.3 SELECT CAMERA OPERATION3.5 PLAYBACK Figure 3-2 On-screen Keyboard2009/05/25 090940PM 2009/05/25 090930PM2009/05/25 091030PM 3.6.1 General PTZ control if PTZ cameras are installed 3.6 PTZFigure 3-3 Express Control PTZ 3.6.2 Express Control of PTZ∙ 14, 15 PTZ tilt down ∙ 16 PTZ pan/tilt right and down REMEMBER∙ 6 Focus closer ∙ 10 Focus further ∙ 7 Zoom in ∙ 11 Zoom out 3.7 LAYOUT 3.8 CHANNEL SWITCHING3.7.1 Bring to full screen mode 3.10 SEQUENCE 3.9 DISPLAY3.11 ZOOM HD temp. too highFigure 3-4 Zoom Express Control 3.12 SEARCHFigure 3-5 Search Menu - Time Search 3.12.1 Time SearchFrom Select starting date and time To Select ending date and time 3.12.2 Event SearchCamera Select which cameras to search for 3.13 COPY 3.14 LOGOUT 4.1 CONFIGURATION MENU 4 DVR CONFIGURATION4.2 EXPRESS ChapterRecord With Record ModeNetwork Type correctly if you plan to use the DDNS feature see Section4.3.1 Basic Setting 4.3 CAMERA SETTINGPage 4.3.2 Video Adjust 4.3.3 Motion Timeout Alarm output lasts for the set time duration Output Type Output action when motion is triggeredTimeout Duration Time duration selectable from 1 to 150 seconds How to select motion grid by mouse 1. Select lower-right gridFigure 4-5 Camera Menu - Motion Grid Setting Figure 4-6 Camera Menu - Video Loss 4.3.4 Video Loss4.4.1 Record 4.4 RECORD & PLAY SETTING4.4.2 Built-in Calculator 4.4.3 Play xx days of data can be stored based on current setting4.5.1 Alarm 4.5 ALARM & EVENT SETTINGTimeout Alarm output lasts for the set time duration Output Type Output action when alarm is triggeredTransparent Alarm output remains as long as the alarm input is active Timeout Duration Time duration selectable from 1 to 150 seconds4.5.2 Event HD Temperature Figure 4-13 Alarm & Event Menu - Event - HD Failure HD FailureFigure 4-14 Alarm & Event Menu - Event - HD Full HD FullFigure 4-15 Alarm & Event Menu - Event - HD Off HD OffFigure 4-16 Alarm & Event Menu - Event - Power Loss Power LossFigure 4-17 Alarm & Event Menu - Event - Network Loss Network Loss4.5.4 Express Setup 4.5.3 Schedule Setting4.5.5 Holidays 4.5.6 Schedule To Set Schedule using MouseSchedule Setting from front panel Page Editing Timezone NTSC 720x480 720x240 PAL 720x576 / 720x288 To Set Schedule using Mouse 4.5.7 Alarm ActionAlarm Action Setting from front panel Page Page 4.6.1 LAN 4.6 NETWORK SETTINGNetwork Type HTTP Port Port number for HTTP/WEB communication The default port for the ECOR264-4/ECOR264-8 isAdditional information 4.6.2 EMAIL NOTE For more reliable email service, use the server’s IP addressEverfocusDDNS 4.6.3 DDNSExample http//hostname.everfocusddns.com Password Password of the dyndns account Confirm Re-enter passwordHost name Host name created through the dyndns account User name User name of the dyndns account4.6.4 Alarm Server 4.7.1 Disk 4.7 Disk Information4.8.1 Monitor OSD 4.8 DISPLAY SETTINGMain Monitor Step Sequence order. For reference 4.8.2 Main M/T SEQCamera Select which camera appears in the current step 4.9.1 Date/Time 4.9 SYSTEM SETTING4.9.2 Daylight Saving 4.9.3 User Figure 4-34 System Menu - User - Edit EditMain Menu at the DVR Configuration Menu at the DVRUser Level and Right User Level and RightRS485 4.9.4 I/O ControlEverfocus, or Samsung. NOTE all cameras must use the same protocol Control4.9.5 Misc ConfigurationsFirmware 4.10.1 System 4.10 INFORMATIONSystem NetworkFrom 4.10.2 LogLog Type Next Page Go to the next page of log Close Close the window Prev Page Go to the previous page of logFigure 4-39 Log List 5.1 Introduction to TCP/IP 5 Networking Overview5.2 Subnet Masks 5.3 Gateway Address5.4 Virtual Ports 5.5 Pre-Installation5.6 What is your Network Setup? Crossover Ethernet Cable Pin outs 5.7 Simple One to One ConnectionConnection Procedure Page Page Restart both the computer and the DVR Click on the option that says “Use the following IP address”Straight Through Ethernet Cable Pin outs 5.8 Direct High Speed Modem ConnectionConnection Procedure Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Connection Procedure 5.9 Router or LAN ConnectionStraight Through Ethernet Cable Pin outs Exit from the Menu to save settings To manually assign an address Log into the EverFocus DVR menu and go to the Network Setting Menuo If using Windows Vista, choose Search instead Type “command” and click on OKTo set DVR for Internet Connection through router 6 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO ECOR264-4/ECOR264-8Chapter 6.2.1 Installing ActiveX controls 6.2 BROWSER SECURITY SETTINGInstall the ePlusDVR.cab file when prompted to do so Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do soNow, you will able to see the remote live page 6.2.2 Enabling ActiveX Controls “Prompt” “Enable”Install the ePlusDVR.cab file when prompted to do so Close the window so you are back at the login screenDefault password Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW 6.4 REMOTE PLAYBACK Chapter 7 EVERFOCUS DDNS SETUPDDNS name until you get “Success” 8.2 TYPICAL LINKSYS PORT FORWARDING 8 LINKSYS & D-LINK PORT FORWARDINGChapter Here is an example for how the port information might look 8.3 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule The DVR will not go into record mode 9 TROUBLESHOOTINGThe DVR displays nothing on the main monitor There is no display coming from one of the channels on the DVRAppendix APPENDIX A TIMING OF ALARM MODESt Event Alarm Reset Input Event Alarm Durationt Duration = t Reaction Timeout Mode Retrigger of Alarms Record Mode Normal + Event CaseRecord With Recording days APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESCase Record Mode Normal + Event or Event Only Record With Preset SettingPreset Setting Option Appendix APPENDIX C REMOTE CONTROLBeijing office Headquarter OfficeEuropean Office Japan Office