Universal L60 manual General Maintenance

GENERAL MAINTENANCE

The Drive Roll (Drawing L60-I-00D #06) should be kept clean to avoid slippage. This can affect the label transfer onto the Vacuum Head. Clean with lacquer thinner, alcohol or similar cleaner to remove glue build-up.

Fig 24

The Rewind Assembly should be set just tight enough to rewind the waste web. Adjusting the tension of the Rewind Assembly is accomplished by:

1.Loosening the nut that secures the Slip Clutch Spring Retainer (See Fig 25 below)

2.With a flat head screwdriver, turn the Slip Clutch Spring Retainer clockwise for more tension, or counter clockwise for less tension.

Nut

Fig 25

Page 24