Panamax MAX 5410 owner manual Feature Overview, Led

FEATURE OVERVIEW

Front Panel Pushbutton:	LED:	LED Indicators:	Meter Light Dimmer:	Voltmeter:
1 of 2 Triggers that can activate a	Indicates ON/OFF	Status indicator lights for:	Controls brightness	Backlit analog meter
turn-on or shutdown sequence for	status. Flashing	• DC Voltage Trigger	of the Voltmeter	measures incoming
Outlet Banks 1 and 2 and High-	indicates Turn	• Switched Outlets	backlighting.	voltage source from
Current outlets.	ON/OFF sequence	• Ground OK		0-150 VAC.
	in progress.	• Line Fault
See the Featured Details sec-		• Unsafe Voltage
tion for more information.

LIGHT		150
METER	0

AC VOLTS

TRIGGER	SWITCHED	GROUND	LINE	UNSAFE
	OUTLETS	OK	FAULT	VOLTAGE

Convenience Outlet: Provides a quick convenient way to plug in components such as camcorders and video game systems.

15A Circuit Breaker: Opens in the event that equipment plugged into the MAX® 5410 draws too much current. When the white button of the breaker is visible, the breaker has opened. Reduce the load and push to reset.

High-Current Outlet Bank:	Filtered Outlet
Two delayed outlets designed	Banks 1 and 2:
for high-current components	Four switched outlets for
such as amplifiers and pow-	audio/video components
ered subwoofers. The current	that do not require con-
available to connected equip-	stant power.
ment is not limited by the
noise filtration components.

Filtered Outlet

Banks 3 and 4:

Four Always-On outlets for audio/video components that require constant power to maintain programmed settings.

RS232	USB Style	Satellite	Cable TV
Connection:	Port for	Coax Jacks:	Coax Jacks:
For home	LED	Two pairs of gold	Two pairs of gold
automation	Light	plated F-Connectors	plated F-Connectors
systems.		optimized for	optimized for Cable
		Satellite TV signal	TV and non-amplified
		line protection.	Rooftop Antenna
			signal line protection.

HIGH CURRENT OUTLETS 1 SWITCHED OUTLETS 2

15A BREAKER

GROUND

3 ALWAYS ON OUTLETS 4

				SATELLITE			CATV/ANT
		USB
		LED
RS232 CONTROL		LIGHT
								Engineered
								in the USA
								Assembled
								in China
12V TRIGGER				HC	SWITCHED	LINE	EQUIP. 1	EQUIP. 2
IN	OUT	TRIGGER	TRIGGER
				OUTLETS	OUTLETS
		ENABLE	DELAY	DELAY	DELAY

IEC320 INLET

IEC Main Power Receptacle: Power cord connects to this receptacle.

Ground Lug: Provides a common grounding point for equipment with separate ground leads.

Voltage Sense	Voltage Sense
Trigger Input:	Trigger Output:
3.5mm Mini-Plug jack.	3.5mm Mini-Plug jack.
Connect to a remote trigger	Supplies a 12VDC
device that provides 12VDC	trigger to control
to trigger a startup/shutdown	the startup/shutdown
sequence. This is the sec-	of an additional device.
ond trigger that will activate
the MAX® 5410 turn-on or
shutdown sequence. (See
pushbutton on front panel).

Input	Output	High-Current
Trigger	Trigger	Outlets Turn-On
Enable	Delay	Switch:
Switch	Switch	2-position slide
		switch. Allows
		adjustment of the
		Turn-On delay for
		the two High-Current
		Outlets. Choose
		between 0 and 10
		seconds.

Outlet Banks

1 and 2 Turn-Off

Switch:

2-position slide switch. Allows adjustment of the Turn-Off delay for Outlet Bank 1. Choose between

0 and 10 seconds.

Telephone Jacks: In/Out connections for telephone line or pay-per-view line protection. Integrated lone splitter allows two devices to be connected to one phone line.

4 1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com