Panamax MAX 5410 owner manual Meter Light Control, Voltmeter, Convenience Outlet

Page 8

FEATURE DETAILS

METER

LIGHT

TRIGGER

SWITCHED

GROUND

LINE

UNSAFE

 

OUTLETS

OK

FAULT

VOLTAGE

METER

LIGHT

TRIGGER

SWITCHED

GROUND

LINE

UNSAFE

 

OUTLETS

OK

FAULT

VOLTAGE

METER

LIGHT

TRIGGER

SWITCHED

GROUND

LINE

UNSAFE

 

OUTLETS

OK

FAULT

VOLTAGE

0

150

 

AC VOLTS

0

150

 

AC VOLTS

0

150

 

AC VOLTS

(Diagnostic Lights Continued)

Ground OK: Green LED. When this light is ON, it indicates that the wall outlet is properly wired. When the light is OFF, it indicates that the wall outlet has a reversed line and neutral wire, or that there is no ground present.

Line Fault: Red LED. When this light is ON, it is indicating that the wall outlet has a reversed line and neutral wire, or there is no ground present. This light will remain OFF if the wall outlet is properly wired.

Unsafe Voltage: Red LED. Under normal voltage conditions, this light stays OFF. When this light is FLASHING slow- ly (once per second), it indicates an undervoltage (<95 VAC) or overvoltage (>134 VAC) condition. When the light is flash- ing quickly (4 times per second), it indicates a 10 second recovery period from an under/overvoltage condition. This light will flash quickly when the MAX® 5410 is first plugged into the wall outlet.

LIGHT

 

150

METER

0

 

AC VOLTS

TRIGGER

SWITCHED

GROUND

LINE

UNSAFE

 

OUTLETS

OK

FAULT

VOLTAGE

LIGHT

 

150

METER

0

 

AC VOLTS

TRIGGER

SWITCHED

GROUND

LINE

UNSAFE

 

OUTLETS

OK

FAULT

VOLTAGE

150

AC VOLTS

Meter Light Control

Controls the brightness level, or turns the lighting off altogether.

Voltmeter

The analog Voltmeter is backlit to provide the ability to view the reading in a dark room. LEDs (light emitting diodes) are used as the light source in order to provide durability and long life. The “Meter Light” dimmer controls the brightness level, or turns the lighting off altogether.

The Voltmeter monitors the incoming voltage from the wall receptacle and provides a visual representation of the available power. The voltmeter is ALWAYS-ON and indicates the incoming line voltage even during an unsafe voltage condition. Readings above 150VAC will not be accurate due to the meter’s damping characteristics.

Convenience Outlet

A single outlet on the front panel of the MAX® 5410 provides an easy to reach power source for electronic equipment typi- cally used on a part time basis. Such equipment includes anything from video game systems to camcorders.

The convenience outlet not only provides superior surge suppression, but also taps into Filter Circuits to provide clean power for your sensitive electronic equipment. This outlet is an Always-On outlet and will continually supply a steady source of power for your connected equipment. It is important to remember that power will be disconnected only in the event of an unsafe voltage condition.

6

 

 

 

1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com

Image 8
Contents MAX 5410 Pro Series Model # M5410 Table of Contents Before YOU BeginOther Features Enhance Functionality IntroductionFiltered Outlet Banks High-Current Outlet BankBasic Signal Line Connections Connection DiagramsTypical AC Power, RS232 and 12V Trigger Connections Feature Overview LEDFront Panel Pushbutton Feature DetailsDiagnostic Lights Convenience Outlet Meter Light ControlVoltmeter Filtered Outlet Banks High Current OutletsCircuit Breaker High-Current Outlet BankVoltage Sense Trigger DC Triggers Power Cord SignalPerfect Coaxial Line ProtectionSignalPerfect Telephone Line Protection Protect or Disconnect AC Surge Protection SurgeGate Plus ProtectionEmail custrelations@panamax.com Fax Technical SpecificationsContacting Panamax Can the MAX 5410 be included in an Equipment rack? OFF with the MAX 5410. How can I fix This?Spike? What Does EMI and RFI stand for?MAX PRO-SERIES RS-232 Command Specifications