Panamax MAX 5300 owner manual Feature Overview, Voltmeter

FEATURE OVERVIEW

Switched Outlets Pushbutton:	LED Indicators:	Meter Light Dimmer:	Voltmeter:
1 of 2 Triggers that can activate a	Status indicator lights	Controls brightness	Backlit analog meter
turn-on or shutdown sequence for	for Switched Outlets,	of the Voltmeter	measures incoming
Outlet Bank 2 and High-Current outlets.	DC Voltage Trigger,	backlighting.	voltage source from
	Ground OK,		0-150 VAC.
	Line Fault
	and Unsafe Voltage

Convenience Outlet:

Provides a quick convenient way to plug in components such as camcorders and video game systems.

15A Circuit Breaker:

Opens in the event that equipment plugged into the MAX® 5300 draws too much current. When the white button of the breaker is visible, the breaker has opened. Reduce the load and push to reset.

Filtered Outlet Bank 1:

Four Always-On, Balanced Double L filtered outlets for audio/video components that require constant power to maintain programmed settings.

Filtered Outlet Bank 2:

Four switched, Balanced Double L filtered outlets for audio/video components that do not require constant power.

High Current Outlet Bank:	Satellite Coax Jacks:	Cable TV Coax Jacks:
Two delayed outlets designed for	Two pairs of gold plated	Two pairs of gold plated
high-current components such as	F-Connectors optimized	F-Connectors optimized for
amplifiers and powered subwoofers.	for Satellite TV signal	Cable TV and non-ampli-
The current available to connected	line protection.	fied Rooftop Antenna signal
equipment is not limited by the		line protection.
noise filtration components.

IEC Main Power	Ground Lug:	Voltage Sense	Voltage Sense	High Current	Outlet Bank 2 Turn-	Telephone Jacks:
Receptacle:	Provides a	Trigger Input:	Trigger Output:	Outlets Turn-On	Off Switch:	In/Out connections
Detachable power	common	1/8 inch Mini-Plug jack.	1/8 inch Mini-Plug jack.	Switch:	3-position slide switch.	for telephone line or
cord connects to	grounding point	Connect to a remote trigger	Connecting a 12VDC trig-	3-position slide switch.	Allows adjustment of the	pay-per-view line
this receptacle.	for equipment	device that provides 12VDC to	ger to the Voltage Sense	Allows adjustment of	Turn-Off delay for Outlet	protection.
	with separate	trigger a startup/shutdown	Circuit will allow the same	the Turn-On delay for	Bank 2. Choose
	ground leads.	sequence. This is the second	signal to pass through the	the two High-Current	between Always-On,
		trigger that will activate the	Voltage Sense Output to	Outlets. Choose	10 and 30 seconds.
		MAX® 5300 turn-on or shut -	control the startup/shut-	between 0, 10 and 30
		down sequence. (See switched	down of an additional	seconds.
		outlets pushbutton on front	device.
		panel).

4 150 Mitchell Blvd., San Rafael, CA 94903 • www.panamax.com