3 SpeedTouch™ for Microsoft Windows
3.1. Installing the SpeedTouch™
Introduction This section will assist you in installing the SpeedTouch™ and preparing your PC for your Internet connectivity.
Microsoft Windows • One of the following OSs must be readily installed on your PC:
•Microsoft Windows 98/98SE or Microsoft Windows ME
•Microsoft Windows 2000 or Microsoft Windows XP
You may need the Windows installation
•For Windows98/98SE/ME:
•Pentium processor 166 MHz, or higher (or compatible)
•32 Mega Byte (MB) of memory, or more.
•For Window2000/XP :
•Pentium II processor, or higher (or compatible)
•64 MB of memory, or more.
•30 MB of free disk space
•Microsoft
•A Web browser, e.g. Netscape Navigator, Internet Explorer, ... for surfing the Internet.
Two installation As your SpeedTouch™ is a true
•The SpeedTouch Setup wizard (application) Installation
By inserting the SpeedTouch™ Installation
•The
The installation procedure is initiated by connecting the SpeedTouch™ to your PC's USB port.
It does not matter which method you use, both are equally valid.
In this section, the SpeedTouch Setup wizard (application) installation is fully described. In case you experience problems with this installation, you can try the
Windows OS The installation procedures might be slightly different depending on the Microsoft differences Windows OS you are using:
•Some windows will look differently
•On Windows 98/98SE no 'Digital Signature' window will pop up
•For Windows 98/98SE, at the end of the installation procedure, you may be asked to enter an area code for
10 | 3EC 36714 BAAA TCZZA Ed. 02 |
|