Specifications

	Table 3. APC Power Inverter Technical Specifications
	Item	Specification

Input	Nominal Voltage	230 V
Characteristics
	Rated Voltage	230 V
	Frequency	47-53 Hz
	Nominal Rated Current	3.47 A
	Input Circuit Breaker Rating	10 A
	Input Voltage Window for Utility Operation	100 - 265 VAC

Output	Voltage (on Mains)	100 - 265 VAC
Characteristics
	Voltage (on battery)	210 - 240 VAC
	Rated VA	800 VA
	Rated Watts	500 W
	Nominal Rated Current	3.47 A
	Overload Indicated ON BATTERY	>100%
	Shutdown due to OVERLOAD	> 100% after 60 seconds (see Table 1 and following note)
	Frequency (ON BATTERY)	50 Hz +/- 1%

Surge	Built-in Surge Protection	Protects the load from surges and spikes..
Protection
Environmental	Ambient Operating Temperature	0-45 degrees C
	Humidity	95 % Relative humidity, non-condensing
	Altitude	3000 m

Physical	Input Line	IEC socket
	Outlet Receptacles	IEC socket
	Dimensions - Unit (h) x (w) x (d)	Main Housing Chassis: 51.2 x 47.5 x 43.0 cm
		Inverter Assembly: 13.0 x 50.6 x 29.3 cm
		Battery: 27.94 x 17.78 x 41.27 cm
	Weight	Main Housing Chassis: 18 kg
		Inverter Assembly: 13.5 kg
		Battery: 28 kg
	Shipping Weight	Main Housing Chassis: 20.5 kg
		Inverter Assembly: 14.5 kg
		Battery: XX kg (each)

Batteries	Type	Two 12 V, 70 Amp-Hour
	Typical Runtime	Approximately 120 minutes
	Typical Load Set Up	Set-up A = 5 fans, 4 tube lights
		Set-up B = 4 fans, 4 tube lights, and 1 TV
	Runtime at 500 W	Approximately 120 minutes
	Typical Recharge Time (for a 90% Charge	8-10 Hours
	Following a 50% Discharge)
	AC Input Voltage Range for Charging	100 - 265 V

Page 14