American Power Conversion AP9341 manual Installation-TH Module, Toolless peg-mount installation

Installation—TH Module

You can install the TH Module in the front or the rear of the rack or enclosure, using either the rack- mount option, which uses 1 U of rack space, or the toolless peg-mount option, which uses no U-space (the toolless peg-mount option is available only with APC racks and enclosures).

Toolless peg-mount installation

This option may not be available with all racks.

Note

1.Slide both mounting pegs into the holes located in the cable channel in the rear panel of the rack.

2.Snap the TH Module into place by pushing it downward until it locks into position.

Rack-mount installation

1.Remove the toolless mounting pegs located at the front of the unit.

2.Attach the brackets (provided) to each end of the TH Module, using two screws for each bracket.

3.Choose a location in the rack for the TH Module.

4 Temperature/Humidity Module