American Power Conversion AP9341 manual Setting unique identifier numbers

Installation—Accessories

Main Module (AP9340)

TH Module (AP9341)

TH Module (AP9341)

A-Link port used to plug in an APC terminator.

Main Module monitoring connected devices.

CAT5 (or equivalent) cable connecting to the TH Module.

TH Module to be monitored by the Main Module.

CAT5 (or equivalent) cable connecting to the

next TH Module in the cascading configuration.

This port may be used to link to an TH Module or to plug in an APC terminator.

Setting unique identifier numbers

Each TH Module should have its own unique identifier number, which is used in the Main Module’s interface to identify and configure this TH Module.

Use the arrow button to the right of the Identifier # LED display to set a unique number from 01 to 32 for each TH Module in your system. Do not connect more than 32 TH Modules to the Main Module.

When you apply power to the module during the initial installation, all modules will automatically receive a unique identification address. If you manually select duplicate identifiers, the Identifier

# LEDs on the duplicated units will flash.

Temperature/Humidity Module 11