American Power Conversion AP7902 AP7911 Additional, Documentation, Inventory, Please recycle

Page 6

Product Description and Inventory

 

Additional

The Rack PDU User’s Guide and the Rack PDU Addendum are available

documentation

on the supplied CD and on the APC Web site: www.apc.com.

 

The User’s Guide (.\doc\eng\usrguide.pdf) contains additional

 

information about the following topics related to the Rack PDU:

 

• Management interfaces

 

• User accounts

 

• Customizing setup

 

• Security

The Addendum (.\doc\eng\addendum.pdf) contains additional information about the following topics:

The Management Card Wizard

Configuration utilities

File transfers

Inventory

The Rack PDU is shipped with the following items:

Quantity Item

1

Configuration cable (940-0144)

1Cord retention tray (with 4 flat-head screws and 16 wire ties)

2Mounting brackets (with 8 flat-head screws)

4

Rubber feet

 

 

1

APC Switched Rack PDU Utility CD

 

 

1

Warranty registration card

 

 

Receiving inspection

Inspect the package and contents for shipping damage, and make sure

 

that all parts were sent. Report any damage immediately to the shipping

 

agent, and report missing contents, damage, or other problems

 

immediately to APC or your APC reseller.

Please recycle

The shipping materials are recyclable. Please save them for

 

 

later use, or dispose of them appropriately.

InfraStruXure-certifiedThis product is certified for use in InfraStruXure systems. The Configuration section, beginning on page 7, does not apply to Rack PDUs that are part of InfraStruXure systems managed by an InfraStruXure Manager.

2

Switched Rack PDU Installation and Quick Start

Image 6
Contents Switched Rack Power Distribution Unit Page Contents How to Download Firmware Updates Specifications Product Description and Inventory AP7902AP7911 Inventory AdditionalDocumentation Receiving inspectionHow to Install the Rack PDU Mounting options How to Install the Rack PDU Operation Display interfaceTCP/IP configuration methods Quick ConfigurationIP address of the Rack PDU Subnet mask Default gateway InfraStruXure Manager’s documentation for moreConfiguration Settings are Manual, Dhcp only, Bootp only, and DhcpBootp the default setting Quick Configuration Option 43 = 01 04 31 41 50 43 where Local access to Remote access toControl console Choose Network from the Control Console menu Overview Web interfaceTelnet/SSH If you enable SSL and SSH, disable FTP. Allowing file Transfers using FTP compromises the high securityEnvironment of SSL and SSH. Administrators can disable How to Recover From a Lost Password How to Download Firmware Updates XmodemSpecifications AP7902/AP7911Warranty limitations Warranty and ServiceLimited warranty Obtaining serviceExamples of life-support Life-Support PolicyGeneral policy DevicesExpressly approved by the party Radio Frequency InterferenceChanges or modifications to this unit not Responsible for compliance could void990-1664