American Power Conversion AP7902 AP7911 quick start How to Install the Rack PDU

Page 9

How to Install the Rack PDU

For a recessed placement: use four flat-head screws (provided) through the last four holes of each bracket.

2.Insert caged nuts (provided with the rack) on the vertical mounting rails above a number at the start of two U-spaces in your enclosure and below a number at the lower end of those two U–spaces.

2U

3.Align the mounting holes on the brackets with the caged nuts you installed in step 2, and insert four mounting screws (provided with the rack) to secure the brackets to the enclosure.

Switched Rack PDU Installation and Quick Start

5

Image 9

Contents Switched Rack Power Distribution Unit Page Contents How to Download Firmware Updates Specifications Product Description and Inventory AP7902AP7911 Documentation AdditionalInventory Receiving inspectionHow to Install the Rack PDU Mounting options How to Install the Rack PDU Display interface OperationIP address of the Rack PDU Subnet mask Default gateway Quick ConfigurationTCP/IP configuration methods InfraStruXure Manager’s documentation for moreConfiguration Settings are Manual, Dhcp only, Bootp only, and DhcpBootp the default setting Quick Configuration Option 43 = 01 04 31 41 50 43 where Local access to Remote access toControl console Choose Network from the Control Console menu Web interface OverviewTelnet/SSH If you enable SSL and SSH, disable FTP. Allowing file Transfers using FTP compromises the high securityEnvironment of SSL and SSH. Administrators can disable How to Recover From a Lost Password Xmodem How to Download Firmware UpdatesAP7902/AP7911 SpecificationsLimited warranty Warranty and ServiceWarranty limitations Obtaining serviceGeneral policy Life-Support PolicyExamples of life-support DevicesChanges or modifications to this unit not Radio Frequency InterferenceExpressly approved by the party Responsible for compliance could void990-1664