American Power Conversion AP7902 AP7911 quick start Warranty and Service, Limited warranty, Damage

Page 23

Warranty and Service

Limited warranty

APC warrants the Rack PDU to be free from defects in materials and

 

workmanship for a period of two years from the date of purchase. Its

 

obligation under this warranty is limited to repairing or replacing, at its

 

own sole option, any such defective products. This warranty does not

 

apply to equipment that has been damaged by accident, negligence, or

 

misapplication or has been altered or modified in any way. This

 

warranty applies only to the original purchaser.

Warranty limitations

Except as provided herein, APC makes no warranties, express or

 

implied, including warranties of merchantability and fitness for a

 

particular purpose. Some jurisdictions do not permit limitation or

 

exclusion of implied warranties; therefore, the aforesaid limitation(s) or

 

exclusion(s) may not apply to the purchaser.

 

Except as provided above, in no event will APC be liable for direct,

 

indirect, special, incidental, or consequential damages arising out of

 

the use of this product, even if advised of the possibility of such

 

damage.

 

Specifically, APC is not liable for any costs, such as lost profits or

 

revenue, loss of equipment, loss of use of equipment, loss of software,

 

loss of data, costs of substitutes, claims by third parties, or otherwise.

 

This warranty gives you specific legal rights and you may also have

 

other rights, which vary according to jurisdiction.

Obtaining service

To obtain support for problems with your Rack PDU:

 

1. Note the serial number and date of purchase. The serial number is

 

located on the safety label on the back of the Rack PDU.

 

2. Contact Customer Support at a phone number located on the back

 

cover. A technician will try to help you solve the problem by

 

phone.

 

3. If you must return the product, the technician will give you a return

 

material authorization (RMA) number. If the warranty expired, you

 

will be charged for repair or replacement.

 

4. Pack the unit carefully. The warranty does not cover damage

 

sustained in transit. Enclose a letter with your name, address, RMA

 

number and daytime phone number; a copy of the sales receipt;

 

and a check as payment, if applicable.

 

5. Mark the RMA number clearly on the outside of the shipping

 

carton.

 

6. Ship by insured, prepaid carrier to the address provided by the

 

Customer Support technician.

Switched Rack PDU Installation and Quick Start

19

Image 23
Contents Switched Rack Power Distribution Unit Page Contents How to Download Firmware Updates Specifications AP7911 Product Description and InventoryAP7902 Receiving inspection AdditionalDocumentation InventoryHow to Install the Rack PDU Mounting options How to Install the Rack PDU Display interface OperationInfraStruXure Manager’s documentation for more Quick ConfigurationIP address of the Rack PDU Subnet mask Default gateway TCP/IP configuration methodsBootp the default setting ConfigurationSettings are Manual, Dhcp only, Bootp only, and Dhcp Quick Configuration Option 43 = 01 04 31 41 50 43 where Control console Local access toRemote access to Choose Network from the Control Console menu Web interface OverviewTelnet/SSH Environment of SSL and SSH. Administrators can disable If you enable SSL and SSH, disable FTP. Allowing fileTransfers using FTP compromises the high security How to Recover From a Lost Password Xmodem How to Download Firmware UpdatesAP7902/AP7911 SpecificationsObtaining service Warranty and ServiceLimited warranty Warranty limitationsDevices Life-Support PolicyGeneral policy Examples of life-supportResponsible for compliance could void Radio Frequency InterferenceChanges or modifications to this unit not Expressly approved by the party990-1664