American Power Conversion RT-UXICH user manual Introduction

Introduction

The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged.

INSTALLATION

Read the Safety Instruction sheet before installing the UPS.

Unpacking

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

„	UPS	„	Ground wire
„	Front bezel	„	Serial cable
„	Literature kit containing:	„	Battery cable assembly

„	Product documentation, Safety Guide,	„	3000 VA XLI models: three output power cords,
	and Warranty information		two input power cords
„ Smart-UPS RT User Manuals CD		„	5000/6000 VA XLI models: six output power
„	Software CD		cords, Network Management Card
			documentation

Specifications

TEMPERATURE		This unit is intended for indoor use only.
OPERATING	32° to 104° F (0° to 40° C)	Select a location sturdy enough to
STORAGE	5° to 113° F (-15° to 45° C) charge the UPS	handle the weight.
	battery every six months	Do not operate the UPS where there is
MAXIMUM		excessive dust or the temperature and
ELEVATION		humidity are outside the specified limits.
OPERATING	10,000 ft (3,000 m)	Ensure that the air vents on the front
STORAGE	50,000 ft (15,240 m)	and rear of the UPS are not blocked.
HUMIDITY	0 to 95% relative humidity
WEIGHT
UPS	120 lbs (55 kg)
UPS WITH	140 lbs (64 kg)
PACKAGING
	1