inputs, we recommend that an output be configured and monitored appropriately to determine the effectiveness of an input.
•Do not wire this Dry Contact I/O SmartSlot Card when the power is on.
•The installation of this Dry Contact I/O SmartSlot Card must follow applicable building and electrical codes.
•Do not use this card to control voltage exceeding 30 VAC or VDC.
•For proper operation, ensure that the UPS is grounded and the Dry Contact I/O Card is secured with two screws to the UPS.
•Use only a single cord with the plastic cord grip.
See “Ratings for input contacts and output relays” on page 17 in “Specifications” .
10 | Dry Contact I/O SmartSlot Card |