Connecting to the configuration utility
The Configuration Utility does not need to be installed, it runs off the Card. With the Utility, you can:
•review the status of your AP9613 Dry Contact I/O SmartSlot Card and Universal I/O ports
•perform actions in response to a status change in an input port or to some UPS event
•change the status of an output relay port in response to a condition occurring in a device such as your UPS or an environmental monitor
•upgrade the firmware on your AP9613 Dry Contact SmartSlot I/O Card
To launch the Configuration Utility user interface, use the USB cable to connect your PC to the port indicated by item #2 on your Dry Contact I/O front panel (see “Itemizing the features of the Dry Contact I/O SmartSlot Card” on page 4).
When the Card is connected to the host PC, it displays as a drive letter on your PC, see drive E in the graphic below for example.
14 | Dry Contact I/O SmartSlot Card |