APC SYBATT manual Status Menu

CHAPTER 3: MENU COMMANDS

Logging Menu (continued)

Menu Item	Function
List Event Groups	Lists the specific events in each group.
Power Events
UPS Control Events
User Activities
UPS Fault Events
Measure UPS Events
Clear Log	Clears the view log. Does not clear the active event lists.

Status Menu

The Status Menu displays load, battery/power module, voltage, and electrical current information.

Menu Item		Function
Ø Vin Vout Iout		Displays input voltage(s), output voltage(s), and output current information.
% load assuming		Compares the current load to the total capacity of all power modules.
no redundancy
% load allowing for		Compares the current load to the total capacity of all power modules, except the power
n+ redundancy		modules that are set aside by the “Fault Tolerance” alarm threshold. For example, if there
		are four power modules installed, and the fault tolerance alarm threshold is set to “1,” this
		percentage of load uses only three power modules for the calculation. See Setup-Alarms to
		set the redundancy level.
Frequencies	Displays the measured input and output frequencies.
Battery Status		Displays battery module capacity, runtime, and status information.
Screen
Power Module		Displays power module capacity, fault tolerance, and status information.
Status Screen
Alarm Thresholds		Displays the user-defined alarm settings. See Setup-Alarms to set these alarm thresholds.
Status Screen
Miscellaneous		Displays the summary result Self-Test, Last System Transfer, Operating Mode, and status
Status Screen		of intelligence and redundant intelligence modules.

12