American Power Conversion 3000 VA, 2200 VA Introduction, Specifications, About this UPS, Unpack

Page 3

Introduction

Introduction

About this UPS

The APC Uninterruptible Power Supply (UPS) provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged.

Unpack

Read the Safety Guide before installing the UPS. The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the APC Web site, www.apc.com.

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

UPS

Front bezel

Rail kit

EPO connector

UPS literature kit containing:

Two mounting brackets

Eight flathead screws

Product documentation

Smart-UPS® User Manuals CD

PowerChute® CD

Serial and USB communication cables

Safety information

Warranty information

230V Models Only:

UPS literature kit additional contents:

Input power cord

Alternate input power cord (UK customers)

Utility connector plug

IEC jumper cables

The model and serial numbers for all units are located on the rear panel. See the small label with numbers and bar codes.

Specifications

Temperature

32° to 104° F (0° to 40° C)

This unit is designed for indoor

Operating

use only. Select a location sturdy

Storage

5° to 86° F (-15°to 30° C) charge the UPS battery every six months

enough to handle the weight.

 

86° to 113° F (30° to 45° C) charge the UPS battery every three months

Do not operate the UPS where

Maximum

 

there is excessive dust or the

Elevation

 

temperature or humidity are

Operating

10,000 ft (3,000 m)

outside the specified limits.

Storage

50,000 ft (15,240 m)

 

 

 

 

Humidity

0 to 95% relative humidity, non-condensing

 

 

 

 

Weight

135 lbs (61 kg) with battery module

135 lbs (61 kg)

 

80 lbs (36 kg) without battery module

 

 

 

 

Maximum Number of External Battery Packs Supported by the

10

Smart-UPS XL

 

 

 

 

Smart-UPS XL 2200/3000 VA 120/230 VAC 3U Rack Mount User Manual

3

Image 3
Contents APC Smart-UPSXL Page Unpack SpecificationsIntroduction About this UPSInstallation Install the Rails in the RackInstall the UPS in the Rack and Connect the Battery Module Rear Panels AccessoriesConnect Equipment and Power to the UPS Start UpEmergency Power Off Start the UPSCommunication Ports Display Panel Indicators and Function Buttons OperationDisplay Panels Feature Feature Title Function Button UPS settings ConfigurationFactory User Selectable Function Default Choices Description Maintenance, Transport, and Service Replacing the Battery ModuleService Problem and/or Possible Cause Solution TroubleshootingProblem and/or Possible Cause Solution There is no utility power Regulatory and Warranty Information Limited WarrantyRegulatory Agency Approvals and Radio Frequency Warnings Date of product declaration APC Worldwide Customer Support