Bypass mode | American Power Conversion 3000, 5000 specification

American Power Conversion 3000, 5000 manual Bypass mode, Transfer between modes of operation

5.0 Operation

Operation on-battery is limited in duration according to available battery capacity and load. Local users are alerted to this mode by visual and audible indicators. When on- battery, the UPS displays available run time and emits a sequence of four beeps every 30 seconds. During an extended mains failure, the battery capacity will eventually become too low to support the load and the UPS will shut down. The UPS alerts the user to a low battery condition 2, 5, 7, or 10 minutes before shutdown, depending upon the user setting. The UPS beeps once every second to warn local users of the low battery condition. The UPS alerts remote users to on-battery operation and low battery conditions using serial communications or simple signaling from the Computer Interface port.

5.1.5 Bypass mode

When in bypass mode, the load is supplied power conditioned by the Isolation Unit. However, the load is not protected from mains voltage sags, swells, or blackouts. The UPS automatically transfers to bypass mode when a failure occurs in the Electronics Unit, including blocked fan, battery charger fault, overtemperature, and welded main relay—see Section 7.2 for a complete list of fault messages. The UPS also automati- cally transfers to bypass if the EU separating screw is loosened. A manual bypass switch on the EU is used when maintenance of the EU is required. The UPS must be returned to on-line operation manually.

Local users are alerted to this mode by visual and audible indicators. When in bypass, the UPS displays the reason for bypass (fan failure, EU switch actuated, etc.) and beeps. The UPS alerts remote users to the bypass conditions via serial communica- tions from the Computer Interface port.

5.1.6 Transfer between modes of operation

Transfer of load power to and from all modes of operation occurs synchronously with the mains voltage phase. See the Specifications section of this manual for transfer time ratings.

3000, 5000 specifications

American Power Conversion (APC) has long been a leader in the manufacturing of uninterruptible power supplies (UPS), and among its range of products, the APC 5000 and 3000 series stand out for their robust performance and reliability. These UPS systems are designed to ensure a continuous flow of power, protecting sensitive electronic equipment from fluctuations and outages.

The APC 5000 and 3000 models boast a range of key features that make them suitable for both commercial and residential applications. One of the primary characteristics is their high power capacity. The 5000 model provides a substantial 5000VA/4500W output, while the 3000 variant offers 3000VA/2700W. This enables users to connect multiple devices and critical loads without the risk of overload.

Both models utilize advanced double conversion technology, which ensures that the output power is consistently clean and stable. This technology is crucial for sensitive electronics, as it filters out voltage irregularities, providing pure sine wave output. This characteristic is particularly important for equipment like servers, data centers, and networking hardware, as it enhances their longevity and operational efficiency.

Another notable feature is their extended battery runtime capability. The APC 5000 and 3000 units are designed with hot-swappable batteries, allowing for easy replacement without interrupting the power supply. This enhances the overall reliability of the system, ensuring that even during maintenance, equipment remains operational.

In terms of connectivity, both models come equipped with multiple outlets for various plug types, as well as USB and network ports for monitoring and management. The integration with APC's PowerChute software allows users to manage power preferences, monitor battery health, and receive alerts when attention is needed. This level of monitoring is essential for facilities management teams, allowing them to ensure continuous operations without power-related disruptions.

The APC 5000 and 3000 also feature robust thermal management systems. With built-in fans, these units ensure efficient airflow and heat dissipation, protecting internal components from damage due to overheating.

In conclusion, the APC 5000 and 3000 series represent a powerful solution for those seeking reliable power protection. With their advanced technologies, multiple connectivity options, and serviceability features, these UPS systems stand out as trusted components in any power management strategy. Whether in a data center or a home office, the reliability and efficiency of these models make them invaluable in today’s power-dependent environment.