American Power Conversion 5000, 3000 manual UPS Diagnostics menu

Page 35

5.0 Operation

5.2.4 UPS Status menu (continued)

This screen shows the frequency to which the UPS’s output is synchronized (accuracy is ±1% of the full scale value of 63 Hz).

This screen shows the number of Battery Packs connected in the system.

This screen shows the number of bad or worn Battery

Packs connected in the system. To identify the bad Battery

Packs, locate the packs having an illuminated Replace

Battery indicator.

5.2.5 UPS Diagnostics menu

The UPS Diagnostic menu allows the user to access information that may be useful when troubleshooting the UPS.

This screen shows the UPS’s identity name. The name set by the factory can be changed to an 8 character alphanu- meric name using optional UPS monitoring application software.

This screen shows the UPS’s serial number set by the factory.

This screen shows the UPS’s date of manufacture set by the factory.

This screen shows the date of the last Battery Pack replacement. It is set to the date of manufacture by the factory, but can be updated when new Battery Packs are installed using optional UPS monitoring application software.

This screen shows the firmware instruction set revision for the Electronic Unit’s UPS control microprocessor.

32

Image 35
Contents Matrix UPS Radio frequency interference Important safety instructionsLife Support Policy Limited WarrantyTable of Contents Overview IntroductionRemote interfaces Emergency Power Off EPOHot swappable modules DisplayEnglish SafetyFrançais SécuritéVorsicht Sicherheit¡ATENCION ¡SeguridadIsolation Unit IU Input circuit breaker power on / OFFPresentation Isolation Unit IUCx IEC 320 C13 receptacles Wiring inspection coverPower distribution plate EU separating screwCooling fans Electronics Unit EUElectronics Unit EU Manual bypass switch Battery Pack couplerAccessory panel Battery communications jackOutput battery communications jack Battery PackBattery Pack Input battery communications jackIn-line Battery Pack coupler Battery Pack panel couplerBattery Pack cables Replace Battery indicatorMoving the UPS InstallationReceiving inspection Protection StrategiesPlacement 2 220-240 Vac operation Input voltage requirements1 208 Vac operation Required materials Installation proceduresRequired tools Input hard wiring procedureInstallation Typical input cable installation Input voltage tap selection-208 Vac, 50/60 Hz use only Output wiring procedure ¡- -y Zxyé Module interconnections Installation Xéé f Sgf j z¸ Emergency Power Off EPO interfaceÉx z¸ é ´´ éx z¸ ÇxzÑStart-up LgjModes of operation OperationTransfer between modes of operation Bypass modeMain menu screens Default screensDisplay and controls operation UPS Status menu UPS Control menuUPS Diagnostics menu Operation UPS Setup Operation Operation UPS Tests Password protectionInterface Kits PowerChute SoftwareUPS Monitoring Computer Interface port Difficulty Difficulté Vorsicht Schwierigkeit¡ATENCION DificultadPage Replace Electronics Unit EU Fault messagesUPS requires service Replacing the Electronics Unit Unit Replacing or adding Battery PacksObtaining Service Extended storage Storing the UPSStorage conditions Input SpecificationsTransfer Characteristics Output CharacteristicsApprovals EnvironmentPhysical Page Recharge Time, Load Recharge Computer Declaration of Conformity Serial Numbers Toll free technical support Return shipment addresses

3000, 5000 specifications

American Power Conversion (APC) has long been a leader in the manufacturing of uninterruptible power supplies (UPS), and among its range of products, the APC 5000 and 3000 series stand out for their robust performance and reliability. These UPS systems are designed to ensure a continuous flow of power, protecting sensitive electronic equipment from fluctuations and outages.

The APC 5000 and 3000 models boast a range of key features that make them suitable for both commercial and residential applications. One of the primary characteristics is their high power capacity. The 5000 model provides a substantial 5000VA/4500W output, while the 3000 variant offers 3000VA/2700W. This enables users to connect multiple devices and critical loads without the risk of overload.

Both models utilize advanced double conversion technology, which ensures that the output power is consistently clean and stable. This technology is crucial for sensitive electronics, as it filters out voltage irregularities, providing pure sine wave output. This characteristic is particularly important for equipment like servers, data centers, and networking hardware, as it enhances their longevity and operational efficiency.

Another notable feature is their extended battery runtime capability. The APC 5000 and 3000 units are designed with hot-swappable batteries, allowing for easy replacement without interrupting the power supply. This enhances the overall reliability of the system, ensuring that even during maintenance, equipment remains operational.

In terms of connectivity, both models come equipped with multiple outlets for various plug types, as well as USB and network ports for monitoring and management. The integration with APC's PowerChute software allows users to manage power preferences, monitor battery health, and receive alerts when attention is needed. This level of monitoring is essential for facilities management teams, allowing them to ensure continuous operations without power-related disruptions.

The APC 5000 and 3000 also feature robust thermal management systems. With built-in fans, these units ensure efficient airflow and heat dissipation, protecting internal components from damage due to overheating.

In conclusion, the APC 5000 and 3000 series represent a powerful solution for those seeking reliable power protection. With their advanced technologies, multiple connectivity options, and serviceability features, these UPS systems stand out as trusted components in any power management strategy. Whether in a data center or a home office, the reliability and efficiency of these models make them invaluable in today’s power-dependent environment.