AMX NXA-UPS1500 manual Accessing the Battery Compartment Step Three

Assembling the Battery Pack

Accessing the Battery Compartment - Step Three

4-pin connector power connector inside the enclosure

Metal securing piece

4-pin connector from the battery wiring harness

FIG. 6 Remove the two screws that secure the Battery Compartment Cover. Remove the metal securing piece, connect it to the battery cable harness, and connect the harness to the matching connector inside the unit.

1.Remove the Release tabs on the front panel to expose the screws that secure the Battery Compartment Cover.

2.Remove the screws beneath the Release tabs.

3.Remove the two screws that secure the Battery Compartment Cover

4.Remove the Battery Compartment Cover to access the Battery Compartment.

5.Remove the screw holding the metal securing piece in place.

6.Slide the metal securing piece into the groove on the 4-pin connector (red) from the battery cable harness.

7.Connect the 4-pin connector to the matching connector inside the unit.

8.Reattach the metal securing piece above the connector with the screw.

NXA-UPS1500 Uninterruptible Power Supply 9