AMX NXA-UPS1500 manual EPM Installation and Operation, Unpacking, Selecting Installation Position

Page 31

NXA-UPS1500 EPM Installation

EPM - Installation and Operation

The packing condition and the external outlook of the unit should be inspected carefully before installation. Retain the packing material for future use.

Unpacking

1.Take the EPM out of the PE foam.

2.Remove the packing materials.

The EPM module is approx. 12.5~50 kgs, be cautious when unpacking and lifting the unit to avoid injury.

The EPM includes accessories for tower and rack mount (FIG. 25).

FIG. 25 EPM Accessories for Tower and Rack Mount

Selecting Installation Position

It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the EPM and extend the life of the batteries. Please follow the instructions below:

1.Keep at least 20cm (8 inches) clearance from the rear panel of the EPM from the wall or other obstructions (see FIG. 8 on page 12).

2.Do not block the air-flow to the ventilation openings of the unit.

3.Please ensure the installation site environmental conditions are in accordance with the EPM working specifications to avoid overheat and excessive moisture (see FIG. 9 on page 12).

4.Do not place the EPM in a dusty or corrosive environment or near any flammable objects.

5.This EPM is not designed for outdoor use.

NXA-UPS1500 Uninterruptible Power Supply

27

 

 

Image 31
Contents NXA-UPS1500 AMX Limited Warranty and Disclaimer Table of Contents Battery Replacement Features NXA-UPS1500 Uninterruptible Power SupplyOverview NXA-UPS1500 Product Specifications Product SpecificationsOther AMX Equipment Front Panel LCDNXA-UPS1500 Uninterruptible Power Supply Storage Instructions Important NoticeImportant Safety Instructions Assembling the Battery Pack Accessing the Battery Compartment Step Two Accessing the Battery Compartment Step OneAccessing the Battery Compartment Step Three Page Unpacking Accessories for Tower and Rack MountMounting the NXA-UPS1500 Place the UPS ProperlyUPS Setup Selecting Installation PositionTower Setup Step One Tower SetupTower Setup Step Two Rack-Mount Setup Step One Rack-Mount SetupRack-Mount Setup Step Two Rack-Mount Setup Step Four Rack-Mount Setup Step ThreeRack-Mount Setup Step Five Connect Utility and Load Connecting the UPSConnect the RS-232 Communication Port Connect Network Surge ProtectionNetLinxUPS RS-232 Communication Port Pin AssignmentConnecting the UPS NXA-UPS1500 Uninterruptible Power Supply Operation Operation Assembling the Battery Pack Battery ReplacementReplacing the UPS Battery Step One Replacing the UPS Battery Step Three Replacing the UPS Battery Step TwoRecycling the Used Battery Important Safety Instructions NXA-UPS1500 EPM InstallationImportant Notice EPM SpecificationsSelecting Installation Position EPM Installation and OperationUnpacking Tower Installation Step One EPM Installation InstructionsTower Installation Step Two Use With UPS Step One Using the EPM With The UPSUse With UPS Step Two Rack Mount Installation Step One EPM Rack Mount InstallationRack Mount Installation Step Two Rack Mount Installation Step Four Rack Mount Installation Step ThreeEPM Storage Instructions Connecting the EPM To the UPSReplacing the Battery in the EPM Step One Replacing the Battery In the EPMReplacing the Battery in the EPM Step Two Replacing the Battery in the EPM Step Four Replacing the Battery in the EPM Step ThreeUPS Maintenance NXA-UPS1500 Uninterruptible Power Supply It’s Your World Take Control