Ultra electronic Sicura Laminator quick start Quick Start Guide Ultra Electronics Card Systems

Quick Start Guide Ultra Electronics Card Systems

The temperature will achieve the set point level after a delay of 4 minutes, and the READY indicator will illuminate.

Notes:

1.When switched on, the laminating roller and take-up roll turn for 30 seconds or until a black alignment panel is found by the optical sensor.

2.The Ready LED will flash for

4 minutes until the roller has heated up, cards cannot be fed in until then.

3.Opening the roller lever will stop all card/film movement. Closing the lever performs a Reset function but without the 4 minutes delay.

Page 10 MAGICARD Sicura Laminator