Quick Start Guide | Ultra Electronics Card Systems |
Insert a card into the slot, side to be laminated uppermost.
Cards should be clean,
Adjust the IN/OUT position of the laminate on the card by screwing the core in or out, if necessary.
The card will be laminated in 35- 40 seconds.
The READY indicator should be off during lamination.
ROTARY SWITCH AND DIP SWITCH ADJUSTMENTS
The LEFT/RIGHT position of the laminate on the card can be adjusted by means of the rotary switch scaled 0 to F.
The second rotary switch (Spare) is not used (future option).
DIP SWITCH SETTINGS
All switches are to be left in the UP position except when operating the Sicura in conjunction with a TURBO printer, in which case Switch 1 (brown) should be DOWN.
Page 12 | MAGICARD Sicura Laminator |