Quick Start Guide | Ultra Electronics Card Systems |
Setting up your Sicura Laminator
takes just two easy steps:
1. Unpack and install the laminator
APreparing a Location for the Laminator
BRemoving the Laminator from the Box
CCheck the Package Contents
DInstall the Lamination Film
EConnect the Laminator to a Power Supply
FSet the Optimum operating temperature and test the Laminator Operation
GInterfacing to a Rio/Tango printer
Important Note for Setting Up your Rio/Tango Printer Driver to work with the Sicura Laminator
HInterfacing to a Turbo series printer
2.Stand-alone Mode
IOperation of the Hopper
JAdjusting the Hopper
KError Indicators
3.Verify correct operation
LImportant Cleaning Procedures
MIn Case of Difficulty
Note: The Ultra WEB site at http://www.ultramagicard.com contains comprehensive technical support information including the latest downloadable software, WINDOWS Drivers, Technical Bulletins etc
Conventions
Throughout this guide, the following conventions are used to identify important information.
WARNING - Warning messages indicate where personal injury could result from not following the correct procedures.
CAUTION - Caution messages indicate where damage to equipment could result from not following the correct procedures.
NOTE - Notes convey important information that is identified within the text.
Page 2 | MAGICARD Sicura Laminator |