Section 1. Introduction
The AquaSEAL™ AS-1600is a medium to large format media liquid laminator used to coat graphics with a protective sealant. Operating roll to roll, the media is threaded under the applicator mechanism, under the drying assembly, and onto the take-up roller. During operation, the liquid laminator applies sealant onto the printed graphics and then cures and dries it before winding the media onto the take-up core.
Hardware Overview
Figure 1.1 shows the front view of the liquid laminator. Major components (safety items shown in red) include the following:
Dam Stop Assembly
Draw Down Assembly
Unwind Mandrel
Sealant Tank | Dryer Panel |
| Applicator Nozzle |
Drip Tray
Figure 1.1 AquaSEAL™ AS-1600Liquid Laminator Front Views
6
