SEAL AS-1600 operation manual Safety Information, Intended Use

Safety Information

Intended Use

The AquaSEAL™ AS-1600liquid aminatorl is intended for use with medium and large format graphic output. Graphics can vary in widths up to 1.6M (5 ft.) in width and can be up to 90M (295 ft.) in length (dependent on thickness of media used). The AquaSEAL™ AS-1600liquid laminator is intended for use with AquaSEAL™ water based sealant only. Use of solvent-based or other manufacturers sealants may damage the machine and may void any warranty.

Safety Instructions

Caution

When handling any chemical products, read the manufacturers’ container labels and the Material Safety Data Sheets (MSDS) for important health, safety, and environmental information.

To obtain MSDS Sheets for AquaSEAL™ Products, Please call your local distributor.

In case of emergency, please telephone: +44 (0)1268 530 331 Europe, or

(800) 486-6502 USA

When using any equipment, always follow the manufacturers’ instructions for safe operation.

Warning

Avoid contact with heat source during use. Wear heat resistant gloves and safety glasses. Failure to avoid contact with hot surfaces may cause burns. Always observe manufacturers recommendations when handling chemicals.

4