Panasonic CF-74CCBAXBM manual Setting the USB PCB, Arranging the USB Cable, USB Cable Tape

10.2.5. Setting the USB PCB

1.Fix the USB PCB to the computer using the two Screws<N9>.

2.Connect the USB Cable to the Connector (CN1701).

Screws <N9>: DFHE5025XA

￿Arranging the USB Cable

Safety Working	MP Slide Sheet
	Attach the MP Slid Sheet to prevent the Cable from coming off.

<N9>

CN1701

USB PCB

Fitting edge

Connect

the Connector.

Pass it through the notch.

USB Cable

	Tape
Ensure the Cable does not
come out of the board edge	Pass it through
so that the Cable does not
touch the MP Drive.	the notch.

Avoid runnning over the boss.

MP Slide Sheet

A

Pass the Cable through

the notch and lead it downward.

Fit the surplus length of the Cable into this side.

Fit the Cable between the pins.

Pass it through the rib.

Ensure the "A" end does not come on the level.

10-12