Panasonic CF-74CCBAXBM Attaching the LCD Damper C and LCD Damper D, Arranging the LCD/TS Cable

￿Attaching the LCD Damper C and LCD Damper D

1.Attach the four LCD Damper C to the upper part and lower part of the LCD Unit.

2.Attach the LCD Damper D to the upper center of the LCD Unit.

A			A
	LCD Damper D	0~1mm

Match the LCD Damper D to the center of the LCD Unit.

LCD Unit

LCD Damper C

A

A:Match the LCD Damper C by LCD edge 0~2mm

￿Arranging the LCD/TS Cable

1.Connect the LCD/TS Cable (LCD) to the Connector on the LCD Unit.

2.Connect the LCD/TS Cable (TS) to the Connector (CN603) on the TS PCB.

LCD Display Side

0~1mm

LCD Damper C

LCD Rear Side

B: Attaching the Cloth		Cloth
			Cloth
Cushion	Cloth
	B	Match the end of the Tape to the end of the EMI Sheet.	B
	3~5mm

				Tape
	Attach the Cloth along	LCD Unit			Cover the
					Connector
	the surface of		Safety Working		Terminals
	the Cushion.				using the Tape.
Match the end of			Turn them halfway.
the Cloth to the end			*Avoid too much tension
			on the Cables.
of the Cushion.		TS PCB		EMI Sheet
		LCD/TS Cable

Fold it back and attach to the side surface.
	Ensure the Cloth is surely	Cloth
	attached to the metal
	chassises on both of the
	side and top.
	(The Cloth should catch
	the metal chassieses only.

Before attaching the EMI Sheet, attach the Tape.

Cloth	Ensure it does not come out
	of the metal part.
	Use the Cable covered
	with the Conductive Cloth only.

It must not catch the TAB.)

Cushion

Cloth

95~100mm

Cloth

0~2mm

A

A

Attach the Cloth along the surface of the Cushion.

Corner of the Cloth

Ensure the corner of the Cloth

does not come out of the LCD's edge.

Safety Working

A: Match the Cloth by Cushion edge 0~1mm

10-8