Panasonic CF-74CCBAXBM manual Setting the Speaker and the LED PCB, Red Line, Led Pcb

10.2.13. Setting the Speaker and the LED PCB

1.Fix the LED PCB using the two Screws<N9>.

2.Set the Speaker L and R to the computer.

3.Connect the Speaker Cable L and R to the two Connec- tors (CN1002, CN1003) on the LED PCB.

4.Fix the Speaker Cable L and R using the Tape.

5.Fix the Speaker L and R using the Speaker Holder.

Note:

Ensure the three Hooks of the Speaker Holder are securely set in the computer.

Screws <N9>: DFHE5025XA

￿Soldering the Speaker Cable and Setting the Speaker Rubber

CN1002	<N9>
	CN1003
Tape	LED PCB
Speaker
Holder	Tape
Speaker L
	Speaker
	Holder
	Speaker R

Speaker Speaker Rubber

			Red Line
Soldering	Soldering
White Line	Red Line	Speaker	White Line
	Speaker Cable		Speaker Cable

￿Cautions for Setting the Speaker

Safety Working

Tape

Speaker

Holder

Speaker L

Pass the Speaker Cables through the notch. (Avoid running over.)

Set as the loop of the Speaker Cable is on the upper side.

Tape

Speaker

Holder

Speaker R

Fit to the stand wall.

SP Conductive

SP ConductiveCloth R

Cloth L

Fit to

the corner.

Speaker L Speaker R

Ensure the Cable does not touch the Steel Plate.

Securely attach the SP Conductive Cloth to the round frame of the Speaker.

Ensure the Hooks are securely set in. (3 points)

Pass the Speaker Cables through the notch. (Avoid running over.)

10-19