Panasonic CF-74CCBAXBM manual Removing the Touch PAD and PAD, Screws N14 DRHM0106ZA, Pad Sw Pcb

1.	Disconnect the LCD/INV. Cable from the Connector on	1.	Remove the Palm Rest Sheet.
	the Inverter.	2.	Remove the four Screws <N20>, and then PAD Base
2.	Remove the LCD Unit.		Ass'y.
3.	Remove the Inverter with the Inverter Case.	3.	Disconnect the two Cables from the two Connectors
4.	Remove the two Screws <N18>, and then the W-LAN		(CN1301, CN1302).
	PCB L and R.	4.	Remove the three Screws <N14>.
		5.	Remove the PAD Button WP Rubber and PAD SW PCB.
Screws <N18>: XQN17+BJ6FJ		6.	Remove the Touch PAD.

10.1.18. Removing the Touch PAD and PAD	Screws <N14>: DRHM0106ZA
PCB
	Screws <N20>: DXQT2+G4FCL
Palm Rest Sheet

Pad WP Sheet A

<N20>

<N20>

<N20>

<N20>

PAD Base Ass’y

PAD Button

WP Rubber

Touch PAD

PAD SW PCB

CN1302

<N14>CN1301 <N14><N14>

10-6