Manuals / Panasonic / Computer Equipment / Laptop

Panasonic CF-74CCBAXBM manual Stuck key

Models: CF-74CCBAXBM

1 83
Download 83 pages 10.57 Kb
Page 15
Image 15

6 List of Error Codes <Only when the port replicator is connected>

The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems.

If your system displays one of except the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error.

0200 Failure Fixed Disk

Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified.

0210 Stuck key

Stuck key on keyboard.

0211 Keyboard error

Keyboard not working.

0212 Keyboard Controller Failed

Keyboard controller failed test. May require replacing keyboard controller.

0213 Keyboard locked - Unlock key switch

Unlock the system to proceed.

0230 System RAM Failed at offset : nnnn

System RAM failed at offset nnnn of in the 64k block at which the error was detected.

0231 Shadow RAM Failed at offset : nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was detected.

0232 Extended RAM Failed at offset : nnnn

Extended memory not working or not configured properly at offset nnnn.

0250 System battery is dead - Replace and run SETUP

The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup to reconfigure the system.

*0251 System CMOS checksum bad - Default configuration used

System CMOS has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in CMOS. The BIOS installed Default SETUP Values. If you do not want these values, enter Setup and enter your own values. If the error persists, check the system battery or contact Panasonic Technical Support.

0260 System timer error

The timer test failed. Requires repair of system board.

0270 Real time clock error

Real-time clock fails BIOS test. May require board repair.

*0280 Previous boot incomplete - Default configuration used

Previous POST did not complete successfully. POST loads default values and offers to run Setup. If the failure was caused by incorrect values and they are not corrected, the next boot will likely fail. On systems with control of wait states, improper Setup settings can also termi- nate POST and cause this error on the next boot. Run Setup and verify that the wait-state configuration is correct. This error is cleared the next time the system is booted.

0281 Memory Size found by POST differed from EISA CMOS

Memory size found by POST differed from EISA CMOS.

6-1

Page 14 Page 16
Page 15
Image 15
Panasonic CF-74CCBAXBM manual Stuck key
Page 14 Page 16

CF-74CCBAXBM specifications

The Panasonic CF-74CCBAXBM is a remarkable rugged laptop designed to cater to the demanding needs of professionals in various industries, including construction, utilities, and public safety. Known for its robust build quality and impressive specifications, the CF-74 is engineered to withstand harsh environments while delivering high performance.

One of the standout features of the CF-74 is its durability. The device is MIL-STD-810G certified, which means it meets military standards for toughness, making it resistant to water, dust, vibration, and drops. This ruggedness is complemented by a magnesium alloy chassis, which not only enhances durability but also keeps the device lightweight, thus promoting portability for users who are always on the move.

The laptop is equipped with a 14.0-inch daylight-readable display with a resolution of 1280 x 800 pixels, offering excellent visibility in various lighting conditions. This feature is especially useful for field workers who need to read the screen in bright sunlight. Additionally, the CF-74 supports multi-touch functionality, allowing for an intuitive user experience that improves productivity.

Performance-wise, the CF-74CCBAXBM is powered by Intel's Core i5 processors, providing sufficient processing power for demanding applications. Coupled with up to 8GB of RAM, users can run multiple applications smoothly without experiencing lag. The device also includes a range of storage options, allowing for HDDs or SSDs, which enhances speed and reliability.

Connectivity is another significant aspect of the CF-74's design. It comes equipped with multiple ports, including USB 3.0, HDMI, Ethernet, and serial ports, ensuring that users can easily connect to various peripherals and networks. Additionally, it offers optional features such as a built-in 4G LTE module for mobile data access, GPS functionality, and smart card readers for enhanced security.

In terms of battery life, the CF-74 is designed for long usage hours, making it suitable for extended work sessions in the field. The laptop also supports hot-swappable batteries, enabling users to replace batteries without shutting down the device, thus minimizing downtime.

Overall, the Panasonic CF-74CCBAXBM stands out as an excellent choice for professionals who require a rugged, reliable, and high-performance laptop to handle the challenges of demanding work environments. Its combination of durable design, robust performance, and extensive connectivity options makes it a valuable tool for those in need of a reliable mobile computing solution.