Panasonic CF-74CCBAXBM Setting the SD PCB, Heat Sink and FAN Motor, Pipe Sheet, Fan Dust Sheet

10.2.6. Setting the SD PCB, Heat Sink and FAN Motor

1.Connect the SD FFC to the Connector (CN1401).

2.Fix the SD PCB to the computer using the three Screws<N9>.

3.Set the Heat Sink, Fan Duct and the four Heat Sink Springs.

4.Fix the FAN Motor to the computer using the two Screws<N5>.

5.Attach the Fan Tape 1 and 2 on the FAN Motor, and fix the Cable Holder on them.

Screws <N5>: DXSB2+6FNL

Screws <N9>: DFHE5025XA

￿Applying Grease on the Heat Sink

1.Apply grease on two points of the Heat Sink.

2.Attach the Pipe Sheet on the Heat Pipe.

Match the end of the Pipe Sheet. (0 ~ -2mm)

Pipe Sheet

Fold on the center line and attach it.

Grease is applied.

G751(10mmX10mmXt0.3)

Cable Holder

Fan Tape1

Fan Duct

<N9>

SD PCB

SD FFC

CN1401

Heat Sink

Spring

Fan Dust Sheet

(Attach the Fan Duct Sheet to the back side.)

0~1mm

0~1mm

0~1mm

0~1mm

5~10mm

Fan Dust Sheet

Heat Sink

Grease is applied.

G751(10mmX10mmXt0.3)

Fan Tape2

<N5>

FAN Motor

Heat Sink

Heat Sink Spring

10-13