Section 1. Introduction
Hardware Overview (continued)
Main Power
Heaters
Engaged
Temperature
Controller
Speed
Controller
Figure 1.2 Control Panel
qThe Main Power Circuit Breakers provide
Main Power
Circuit Breakers
Power Cable
Entrance
Figure 1.3 Circuit Breaker / Power Cable Entrance
qThe Power Cable Entrance is the point where the cable connected to the power source enters the machine. It connects the machine to the following power sources:
∙
It is strongly recommended that the machine is fed from an “Earth Leakage” protected electrical outlet – if in doubt, please contact Seal Graphics Technical Services (listed at rear of manual) or consult a licensed electrician.
9